Develop the frequency spectrum

Assignment Help Electrical Engineering

Reference no: EM131279157

1. A voice signal ranging from 300 Hz to 3 kHz amplitude modulates a 600 kHz carrier. Develop the frequency spectrum.

2. Determine the output expression for a multiplier with one sinusoidal input having a peak voltage of 0.2 V and a frequency of 2200 kHz and the other input having a peak voltage of 0.15 V and a frequency of 3300 kHz.

Reference no: EM131279157

Questions Cloud

Determine the frequency spectrum at the output : For the same conditions stated in Problem 19, determine the frequency spectrum at the output of the AM detector (demodulator).

How does an fm signal differ from an am signal : Explain how an audio signal is converted to frequency modulation in the MAX2606 in Figure13-36?

Name two conditions for a pll to acquire lock : A certain fiber-optic cable has a core index of refraction of 1.55 and a cladding index of refraction of 1.35. If a light ray strikes the core/cladding boundary at an angle of 28.2°, will it be reflected or refracted?

Find frequency spectrum at the output of the mixer amplifier : The input to a certain AM receiver consists of a 1500 kHz carrier and two side frequencies separated from the carrier by 20 kHz. Determine the frequency spectrum at the output of the mixer amplifier.

Develop the frequency spectrum : Determine the output expression for a multiplier with one sinusoidal input having a peak voltage of 0.2 V and a frequency of 2200 kHz and the other input having a peak voltage of 0.15 V and a frequency of 3300 kHz.

Determine the carrier frequency and the modulating frequency : The frequency spectrum in Figure 13-55 is for the output of a balanced modulator. Determine the carrier frequency and the modulating frequency.

What is the local oscillator (lo) frequency : An AM receiver is tuned to a transmitted frequency of 680 kHz. What is the local oscillator (LO) frequency?

How many bits does the latch hold in an ad2s90 rdc : Three identical thermocouples are each exposed to a different temperature as follows: Thermocouple A is exposed to 450°C, thermocouple B is exposed to 420°C, and thermocouple C is exposed to 1200°C. Which thermocouple produces the most voltage?

Explain how a strain gage can be used to measure pressure : A certain material being measured undergoes a strain of 3 parts per million. The strain gage has a nominal resistance of 600 and a gage factor of 2.5. Determine the resistance change in the strain gage.

User Account

All Pages