Determine the minimum horizontal force necessary for man

Reference no: EM13313938

Determine the minimum horizontal force necessary for 200 lb man to scale crevice (using his feet and back). The coefficient of static friction between his shoes and his back against the wall is 0.4.

Reference no: EM13313938

Questions Cloud

Determine the maximum force that can safely applied : Determine the maximum force (P) that can safely applied to a steel tee section (20 feet in length) with the point loads at 5 feet from each end. Fixed at one end, pin at the other.

At what speed will the crewman hit the bottom of the ravine : If we assume the ice is perfectly slick (that is, no friction between the crewman and the ice once he slips and falls down), At what speed will the crewman hit the bottom of the ravine

Define a function named average grade : Define a function named average grade. This function returns a double and has four double arguments, testi, test2, test3, test4. The return value should be the average, or arithmetic mean of the four arguments.

Determine the displacement of the beam at each end : A rigid beam (AB), 12 feet in length, with a point load of 9 kips (4 feet from A) is resting on two short steel rods (AC & BD). Diameter of Rod AC is 1 inch, Rod BD diameter is 2 inches.

Determine the minimum horizontal force necessary for man : Determine the minimum horizontal force necessary for 200 lb man to scale crevice (using his feet and back). The coefficient of static friction between his shoes and his back against the wall is 0.4.

Calculate the pressure drop to process pregelatinized starch : A single screw extruder is being used to process pregelatinized starch. The screw dimensions are as follows: channel width 3 cm, channel height 0.5 cm and screw length 50 cm. The wall velocity is estimated to be 0.31 m/s.

Determine the moisture content of product leaving the dryer : The tunnel is supplied with 1500 kg dry air/h at 50°C and 10% RH, and the air leaves at 25°C in equilibrium with the product at 50% RH. Determine the moisture content of product leaving the dryer and the final water activity.

To prepare a project proposal on how to set up the start-up : To prepare a project proposal on how to set up the start-up

Determine what is the flow through the culvert : The upstream invert is at an elevation of 8ft and the downstream invert 4 ft. If the depth at the upstream end of the culvert is 8 ft, what is the flow through the culvert. Assume the culvert is in inlet control.

User Account

All Pages