Determine net gain or loss in reservior storage as volume

Assignment Help Civil Engineering
Reference no: EM13297263

A 175 Mi^2 watershed has a 4200 acre reservior within its boundary . The annual watershed runoff to the reservior is 13in. A flow of 120 mgd (368 ac-ft/day) is to be drafted from the reservior. The annual rainfall is 38in.

Estimate the reservior evaporation using the Penman Theory . The mean daily air temperature is 70 deg F, daily solar radiation is 550 ly/d , mean daily dew point temperature is 55 deg F, and the wind movement at 6in above the pan rim 40 mi/day

Determine the net gain or loss in reservior storage as a volume (ac-ft)

Reference no: EM13297263

Questions Cloud

Explain pairs might be expected to be more ionic : Which of the following pairs might be expected to be more ionic? (a) CaCl2 or MgCl2 (b)NaCl or CaCl2 (c) NaCl or CuCl (d) TiCl3 or TiCl4
What is the greatest bending moment and where is it located : A cantilever beam of length 50 ft is embedded in a wall at A and has a free end B. A concentrated load of 100 kips upward is located at x = 25 ft from A. A uniformly distributed load of 20 kips/ft downward extends from 25 to 50 ft.
Explain what is the concentrations of no3 in the solution : A solution is .450M in HNO3 and 1.3M in Ba(NO3)2. what is the concentrations of No3 in the solution?
Determine the density of the oil and wood : A block of wood with volume V floats in water with 0.68V submerged. determine the density of the oil and wood
Determine net gain or loss in reservior storage as volume : A 175 Mi^2 watershed has a 4200 acre reservior within its boundary . The annual watershed runoff to the reservior is 13in. A flow of 120 mgd (368 ac-ft/day) is to be drafted from the reservior. The annual rainfall is 38in.
Describe what reorder point should jill use and why : Cartridges cost $120 each and require 2 weeks to obtain from the vendor. Jill uses (Q,r) policy to control inventory of cartridges. You can assume that there are 50 working weeks in a year.
What is their period of revolution in earth years : In a certain binary-star system, each star has the a mass of 1.00 multiply.gif 10^30 kg, What is their period of revolution in Earth years
Find the magnitude of the magnetic field at location of coil : A circular coil (500 turns, radius=.195m) is rotating in a uniform magnetic field. At t=0 s. Find the magnitude of the magnetic field at the location of the coil
What is the carbon concentration at 4 mm below surface : A 1045 steel will be heat treated in air at 900 C. What is the carbon concentration at 0.4 mm below the surface after 6 hours

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determining stress fort rigid bar of negligible weight

The rigid bar of negligible weight is supported as shown. Find the stress in each rod if the temperature rises DeltaT after a load P is applied. Use the following data: area of steal rod 320mm2, bronze rod 1300mm2, thermal expansion coefficient Al..

  Design the ramp for the highest design speed

Design the ramp for the highest design speed (to the nearest 5 mph) without exceeding a minimum D of 8.0. (Assume the PC of the horizontal curve is at station 15+00, and the vertical curve PVIs are at the PC and PT of the horizontal curve). Maximu..

  What and where will be the maximum fluid pressure

A 10cm diameter vertical tank holds 20cm of water topped with 15cm of ethyl alcohol. The cylinder is rotated about its central axis at a rotation rate of 20 rad/s. (a) What will be the shape of the air-alcohol and alcohol-water interfaces

  Determine the critical load of a round wooden dowel

Determine the critical load of a round wooden dowel that is 0.9m long and has a diameter of (a) 10mm (b) 15mm. Use E=12GPa

  Determine the velocity in horizontal x-y plane

A particle with a mass of 0.5 kg has a velocity of 10 m/s in the x-direction at time t = 0. Forces F1 and F2 act on the particle, and their magnitudes change with time according to the graphical force-time history shown.

  Calculate the surface area of a rectangular

How will calculate the surface area of a rectangular open trench Length=100 mtr,Width=.6mtr,Depth= .75mtr.

  Quartzite sample in a compression testing machine

A quartzite sample in a compression testing machine is 180mm long and 54mm in diameter. what is the stress under a load of 100kN? if the modulus of elasticity is 102kN/mm2, find the strain develope in the sample.

  Compare and contrast the purpose and scope

Compare and contrast the purpose and scope of the Federal Insecticide, Fungicide, and Rodenticide Act with the provisions of the Federal Food, Drug, and Cosmetic Act.

  Difference between dry and moist lapse rate

Explain how the desert air can contain much more h 2 o vapor in the air than the pole, and still a lower humidity than the pole? what causes the difference between dry and moist lapse rate?

  What is the main objective of nasas mars science laboratory

Q. What is the main objective of NASA's Mars Science Laboratory (MSL) mission? When was it launched and when and where is it scheduled to land on Mars? Explain the major differences between this mission and Mars Exploration Rovers (MER) mission?

  Calculate the detention time

As a consulting engineer you are hired to evaluate the operation and the unit processes within the plant and make recommendations for improvements. You are asked to consider the following units.

  What is the maximum grade the vehicle could ascend

the engine develops a maximum torque of 210ft-lb at 3600 rev/min. what is the maximum grade this vehicle could ascend, on a paved surface, while the engine is developing maximum torque (assume that the available tractive effort is the engine-gener..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd