Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Tuned mass dampers (TMD) have been widely used for vibration control in mechanical engineering systems. A TMD is a device consisting of a mass, a spring, and a damper that is attached to a structure in order to reduce the dynamic response of the structure. The frequency of the TMD is tuned to a particular structural frequency so that when that frequency is excited, the TMD will resonate out of phase with the structural motion. Energy is dissipated by the TMD inertia force acting on the structure.
Problem Description
A rotating machine, such as turbines or compressors, is vibrating and transmitting large forces to the ground. This vibration might be due to shock or unbalanced mass of the rotor. Considering the vibration in vertical direction only, the machine can be represented as a single degree of freedom system having mass M, stiffness K and damper B, subjected to a force, shown in Figure 1. The harmonic force F is due to rotating unbalance when rotating at speed N (see Table 1). A tuned mass damper device is to be mounted on the machine in order to reduce the dynamic response (the TMD has mass m, spring coefficient k and damping coefficient b. Two newly designs were proposed for the TMD devices, as shown in Figure 2. Your task, as an engineer, is to evaluate the performance of each system in order to select the best configuration.
Attachment:- mechanical engineering systems..pdf
in a gas turbine operating at a steady state air enters the compressor with a mass flow rate of 5 kgs at .95 bar and 22
assuming that air in the troposphere behaves like a perfect gas and that as the altitude varies the thermodynamic
the limb of a manometer is inclined at 12 0 to the horizontal. if the water column along the tube is 250 mm what
consider a 24-kw hooded electric open burner in an area where the unit costs of electricity and natural gas are 0.10kwh
a bubble of air is suspended in clean water at ambient pressure and temperature.a. how do the pressure and the number
a 500 mw coal-fired power plant is burning coal with a heating value of 12000 btulb. the coal contains 2.0 sulfur. the
the roller-coaster track shown is contained in a vertical plane. the portion of track between a and b is straight and
The data listed below are claimed for a power cycle operating between hot and cold reservoirs at 1500 K and 450 K, respectively. For each case, determine whether the cycle operates reversibly, operates irreversibly, or is impossible.
the maximum allowable value of each of the reactions is 180 N neglecting of the weight of beam, determine the range of te distance d for which the beam is safe.
Flow rate transmitter specifications are given as following: Input range: 0 to 300 GPM (Gallons Per Minute) Output range: -5V to 5V. If this transmitter needs to be connected to an A/D converter and the requirement is to detect at least 0.25 GPM diff..
Steam at 75 kPa and 13 percent quality is contained in a spring-loaded piston-cylinder device, as shown in the figure, with an initial volume of 5.28 m^3. Steam is now heated until its volume is 13.20 m^3 and its pressure is 300 kPa. Determine the he..
air at 200 kpa and 950 k enters an adiabatic nozzle at low velocity and is discharged at a pressure of 80 kpa. if the
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd