Bottom and the mass of the piston

Assignment Help Mechanical Engineering
Reference no: EM13875199

Two tanks contain steam, and they are both connected to a piston/cylinder. Initially the piston is at the bottom and the mass of the piston is such that a pressure of 1.4 MPa below it will be able to lift it. Steam in A is 4 kg at 7 MPa, 700?C and B has 2 kg at 3 MPa, 350?C. The two valves are opened, and the water comes to a uniform state. Find the final temperature and the total entropy generation, assuming no heat transfer.

Reference no: EM13875199

Questions Cloud

State and the increase in availability : If the heat pump receives 40 kW of work find the water exit state and the increase in availability of the water.
Identify strategies and communication tools to be used : Identify strategies and communication tools to be used in the process- including technology
Identify education,key interrelationships with professions : Select a disease process from among the following-Diabetes,Obesity and Coronary artery disease
Repudiation released her from her duty to perform : Moore contracted in writ- ing to sell her 2012 Hyundai Santa Fe to Hammer for $16,500. Moore agreed to deliver the car on Wednesday, and Hammer promised to pay the $16,500 on the following Friday. Moore contended that Hammer’s repudiation released he..
Bottom and the mass of the piston : Two tanks contain steam, and they are both connected to a piston/cylinder. Initially the piston is at the bottom and the mass of the piston is such that a pressure of 1.4 MPa below it will be able to lift it.
Calculate the thrust on the valve and the depth : Calculate the optimum diameter of the input piston which will allow the press to operate and determine the centre of pressure on immersed surfaces
Calculate the standard deviation of the returns : An entity has a stock that has a beta of 1.20 when the risk free rate is 5% in 2010. The average return on the market in 2010 was 12%. In 2011 the risk free rate increased by 1% due to inflation, but the return on the market increased by 2%. Calculat..
Describes a quality assurance process for ongoing training : Create a Support Model (MS Visio) that describes a quality assurance process for ongoing training, problem reporting, tracking, escalation, and resolution once your selected project is complete and the technology solution is transitioned to operat..
Evaluate the liquidity and profitability of blue water yacht : Evaluate the liquidity and profitability of Blue Water Yachts using selected financial ratios. Assess the company's overall profitability, liquidity, and desirability as an investment.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Decorative water fountains consist of a water reservoir

Decorative water fountains consist of a water reservoir and underground piping to and from a pump. One such system is shown schematically in the figure. The pipe material is PVC (a table is provided). The outlet line from the pump is 18 m and the inl..

  Metal alloy has body centered cubic crystal structure

A certain metal alloy has body centered cubic crystal structure; it has an average atomic weight of 71.2 amu; and the metal has an average atomic radius of 0.131 nm. Determine the theoretical density of this metal in grams per cubic centimetre.

  Rectangular gate is used as a retaining wall

A rectangular gate is used as a retaining wall for seawater as shown in the figure. The gate is hinge at point O 1 m from the bottom. Determine the depth of seawater required for the resultant force to be located at the hinge. The gate width into the..

  Determine the final quality of the r-134a in the container

an air conditioning system is to be filled from a rigid container. the container initially contains 4 kg of saturated

  What value would be displayed on the scada screen

A 4 20 mA signal is sent to a 12-bit Modicon PLC input card, which in turn, sends this to a SCADA. If the signal happens to be 14.25 mA, calculate: What percentage of 0 - 100% will this represent?

  The density of atmospheric air is about 115 kgm3which we

the density of atmospheric air is about 1.15 kgm3which we assume is constant. how large an absolute pressure will

  Melt along the interface between the fe-si alloy-al coating

Your company is considering creating an alumina coating by immersing an Fe-Si alloy into an Al melt, withdrawing the coated Fe-Si, and then oxidizing the Al coated alloy at 1000°C in air to form an alumina coating.

  Determine exergy destroyed and minimum work input process

A well-insulated rigid tank contains 1 kg of air at 30°C. A paddle wheel rotates inside the tank and increases the temperature of the air to 60°C. If the environment is at 100 kPa and 25°C, determine the exergy destroyed and the minimum work input fo..

  Hole at the bottom of a very wide

How fast does water flow from a hole at the bottom of a very wide, 4.6-m-deep storage tank filled with water? Ignore viscosity.

  Methane gas in piston-cylinder assembly goes under adiabatic

Methane gas in a piston-cylinder assembly goes under an adiabatic (no heat transfer) quasi- equilibrium compression. (This process is called isentropic process). The pressure and volume of the gas during the process are related as PV 1.3=constant.

  The thermal efficiency of the combine cycle

A combined vapor power cycle consists of two ideal Rankine cycles with cesium and steam as the working fluids. In the caesium cycle, saturated vapor caesium enters the turbine at100 psia, and saturated liquid exits the condenser at 740ºF. Relevant pr..

  Find expression for the isothermal compressibility

Find expression for the isothermal compressibility and coefficient of thermal expansion for a fluid that is described by the van der waals equation of state. Expression should be in term of measurable properties.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd