indirect contouring, Civil Engineering

how to draw a contour indirectly
Posted Date: 12/26/2013 8:35:57 AM | Location : Rwanda







Related Discussions:- indirect contouring, Assignment Help, Ask Question on indirect contouring, Get Answer, Expert's Help, indirect contouring Discussions

Write discussion on indirect contouring
Your posts are moderated
Related Questions

A rectangular area 4 m × 6 m carries a uniformly distributed load of 100 kN/m 2 at the ground surface. Estimate the vertical pressure at a depth of 6 m vertically below the centre

I retained the soil in my yard by brick with 3 levels to avoid sliding the soil to the street. the appeared part of the bricks from each level is 3 feet and less.The hidden part o

A bed of sand 12 m thick is underlain by a compressible stratum of normally loaded clay, 6 m thick. The water table is at a depth of 5 m below the ground level. The bulk densities

Q. Why we need Transition slabs in bridges? In a number of designs, transition slabs are provided on the approach to bridges. For example soils in embankment supporting the ro

difference between fly levelling and differential levelling

Q. Specification of Wood work for Door? 1. General - Timber for door, window and ventilators frames shall be as specified. Timber shall be sawn in the direction of the grains.

Desirable Characteristics of a Pavement: In order to fulfill the above function, the pavement has to have the following desirable properties : (a) It should be structurall

A clay layer 5 m thick has double drainage. It was consolidated under a load of 127.5 kN/m2. The load is enhanced to 197.5 kN/m 2 . The coefficient of volume compressibility is 5.7

Develop a simple urban constructed wetland design guidelines and drawings. Your report should include the following: I. Data required for the design II. Types of constructed