For which type of measurement thermocouples are used, Electrical Engineering

Thermocouples are used for the measurement of

(A)  Humidity.                                   (B) Pressure.

(C) Temperature.                               (D) Density.

Ans:

Thermocouples are used for the measurement of temperature.

Posted Date: 5/18/2013 7:30:01 AM | Location : United States







Related Discussions:- For which type of measurement thermocouples are used, Assignment Help, Ask Question on For which type of measurement thermocouples are used, Get Answer, Expert's Help, For which type of measurement thermocouples are used Discussions

Write discussion on For which type of measurement thermocouples are used
Your posts are moderated
Related Questions
direct prob

Activities to Preparing Long-term Plans 1. Data collection regarding existing loads, forecast of expected loads, operating conditions, and etc. from Grid substation up to cons

a train weight 5 megaN is taking a slope of 1 in 200 at 45 kmper hour.the engine put in 100 kw.determine the power to be put in by the engine it the train take the slope up of 1 in

Consider a source of voltage v(t) = 10 √2 sin 2t V, with an internal resistance of 1800 Ω. A transformer that can be considered ideal is used to couple a 50- resistive load to th

a. Compare the serial protocols, parallel protocols and wireless protocols in terms of formats, speed, performance and security issues. b. Briefly define two popular parallel pr

A three-phase, 5-hp, 220-V, six-pole, 60-Hz in- duction motor runs at a slip of 0.025 at full load. Rotational and stray-load losses at full load are 5% of the output power. Calcul

Explain the Bidirectional Shift Registers? A Reversible or A Bidirectional shift register is one in which the data can be shift either left or right. D flip-flops are used by

Simulation of a pn Junction An n + p junction is fabricated on a p-type silicon substrate with N A = 8×10 15 cm -3 . The n+ region has a concentration of N D = 1.5×10 18

CPU Based Exchange:   In centralized control, all control equipment is replaced by a single processor which should be quite powerful. It should be capable of processing 10 to 100 c

Flag Registers Flag  register  is also an  8 bit  register. Out of 8 bit  five are  defined as flags to indicate status  of the accumulator  hence it is also called status reg