## Evaluate power transmitted by shaft, Mechanical Engineering

Assignment Help:

Evaluate power transmitted by shaft:

How do you evaluate power transmitted by shaft (P)?

Sol.: Consider force 'F' Newton's acting tangentially on shaft of radius 'R'. If the shaft because of this turning moment (F X R) starts rotating at N rotation per minute then.

Work supplied to shaft/sec = F. Distance moved/sec.

= F.2  .R.N/60 Nm/sec

or,

Power (P) = F.R.2  .N/60 Nm/sec or watt. But F.R = Max. Torque (T) in N-m

That is                                       P = 2  .N.Tmax/60 watts

#### Evaluate the crippling load, A cast iron hollow column, having 100mm extern...

A cast iron hollow column, having 100mm external diameter and 80mm internal diameter is used as a column of 2.4 m length. Using Rankine formula, calculate the crippling load, when

#### What is the drilling operation, What is the Drilling operation Drilling...

What is the Drilling operation Drilling operation can only performed in vertical direction. Hence drilling hole at angle is not performed by drilling machine. It is a big drawb

plate jig

#### Stresses., temparature stresses in composite bars

temparature stresses in composite bars

#### Ionization of inert gases, inert gas is ionizing in tig and mig,plasma arc ...

inert gas is ionizing in tig and mig,plasma arc welding processe.but it is impossible to react with inert gas

#### Compute the outside diameter of the shaft, Compute the outside diameter of ...

Compute the outside diameter of the shaft: A hollow shaft of diameter ratio is 0.4 is needed to transit 600 kW at 120 rpm. The maximum torque being 20% greater than the mean t

#### Calculate the vertical anchoring forces, A converging elbow (see Figure 4) ...

A converging elbow (see Figure 4) turns water through an angle of 135 o in a vertical plane. The flow cross-section diameter is 400 mm at the elbow inlet, section (1), and 200 mm

#### Semi-active suspension systems, With an open loop system, the only way to m...

With an open loop system, the only way to modify the behaviour of the system is to modify the values of physical parameters in the system. For instance we can modify the damping co

#### Calculate the reactive power and current supplied, Question: A series r...

Question: A series resistive inductive load is energised from a 240V (RMS), 50Hz single phase AC supply, such that the load draws 1200W at a power factor of 0.8. a) Calculat

#### Functions of flux coating, FUNCTIONS OF FLUX COATING The coating of the e...

FUNCTIONS OF FLUX COATING The coating of the electrode performs very important functions which are essential for obtaining a weld of required quality; in terms of chemical compos