What would be the reduction in length of the sample

Assignment Help Civil Engineering
Reference no: EM13317729

A core sample of basalt, 4 inches long and 2 inches in diameter, was tested in unconfined compression. The basalt is known to have a modulus of elasticity = 9.1 x 106 psi.

a) At a pressure of 10,000 psi, what would be the reduction in length of the sample?

b) At this pressure, what would be the vertical load on the sample?

c) At 10,000 psi stress the core showed an increase in diameter of 5.5 x 10-4 inches. What is the Poisson's ratio for this sample?

Reference no: EM13317729

Questions Cloud

What is the expected annual savings and expected pw : An energy efficiency project has a first cost of $300,000, A life of 10 years, and no salvage value. Assume that the interest rate is 9%. The most likely value for annual savings is $60,000.
What is the original speed of the son : A father racing his son has two-fifths the kinetic energy of the son, who has three-fifths the mass of the father. The father speeds up by 1.0 m/s, What is the original speed of the son
Provide a class diagram for every user authored class : Examine the sample code you have been provided with. This code is for a simple Car Hire management system. It contains a number of classes.
What is the discharge through the pipe for water temperature : A fire hydrant is supplied through a 6 inch cast iron pipe of 16,000 feet length. The total drop in pressure is limited to 35 psi. What is the discharge through the pipe for a water temperature of 80°F ((kinematic viscosity) = 0.93 × 10-5 ft2/sec)
What would be the reduction in length of the sample : A core sample of basalt, 4 inches long and 2 inches in diameter, was tested in unconfined compression. The basalt is known to have a modulus of elasticity = 9.1 x 106 psi.
Determine by what factor does the rate of heat flow change : Two metal rods of equal length-one aluminum, the other stainless steel-are connected in parallel with a temperature of 16.0%u2218C at one end and 126%u2218C at the other end, by what factor does the rate of heat flow change
What is its greatest distance from the sun : A comet has a very elliptical orbit with a period of 124.0 y. If the closest approach of the comet to the Sun is 0.09 AU, what is its greatest distance from the Sun
What minimum volume must the slab have : A flat slab of styrofoam, with a density of 32 kg/m3, floats on a lake. What minimum volume must the slab have
How much charge is on each plate : A 2.0 cm x 2.0 cm parallel-plate capacitor has a 3.0 mm spacing.The electric field strength inside the capacitor is 1.1 x105 V/m. How much charge is on each plate

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  What is the minimum distance from the stalled car

What is the minimum distance from the stalled car at which the driver could apply the brakes and still stop before hitting it? Assume coefficient of rolling resistance of 0.013.

  What is the range of values of a for which the body moves

The motion is described by the second Newton's law: m(d^2y/dt^2) + a(dy/dt) + ky = 0 where y is the body displacement in m, t is the time in s, a > 0 is the friction coeffcient in kg/s and k is the spring constant in kg/s2.

  What is the ratio of night to day accidents for fatalities

What would the B/C ratio be if the light poles were twice as far apart as assumed above?

  What will be gage reading if atmospheric pressure increases

a bourdon pressure gauge attached to the outside of a tank containing air reads 77.0 psi when the local atmospheric pressure is 760 mm Hg. what will be the gage reading if the atmospheric pressure increases to 773 mm Hg

  What are the moment vectors from f about a-b and c

A small blimp is temporarily moored wherein DC and the centerline of AB are coplanar. A force F from wind, weight, and buoyancy is shown acting at the centerline of the blimp. If F = 5i+ 10 j + 18 k kN

  Calculate the speed of the water relative to the hydrofoil

A speedboat on hydrofoils is moving at 20 m/s in a freshwater lake. Each hydrofoil is 3 m below the surface. Assuming, as an apporximation, frictionless, incompressible flow, find the stagnation pressure(gage) at the front of each hydrofoil.

  Disposal of excavated material

Discuss and use examples to explain the specific factors that you will need to consider when pricing the following items in the bill of quantities foundation excavation

  What should be design criteria for water treatment system

The floor area of each floor in these buildings is 400 m^2. The buildings are separated by large lawns so that the (Exposure + Communication) factor = 1.2.

  Determine the cycle length and distributuion of green

A simple four-leg intersection needs a 2-phase fixed-time signal. The critical flows in the N-S and E-w directions are 600 and 400 veh/hr, respectively, with a 0.95 peak-hour factor.

  How to generate an expression for velocity component

The x-component of a velocity field is ax+b.If the flow is steady, two-dimentional and incompressible; generate an expression for velocity component in the y-direction as a function of x and y.

  Find what is the minimum distance from the stalled car

The road is in good condition and is initially dry, but it becomes wet 160 ft before the stalled car (and stays wet until the car is reached). What is the minimum distance from the stalled car at which the driver could apply the brakes and still s..

  Explain why should find another spot to camp

Based upon the recommended level for CO of 40 mg/m3, the given conditions, AND the fact that the fire will be burning ALL night, should you find another spot to camp b.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd