What size galvanized iron pipe is required to carry a flow

Assignment Help Civil Engineering
Reference no: EM13536754

1.A water line connects two water supply reservoirs (v = 1.059 x 10^-5 ft2/s). The characteristics of the line are 5,000 ft of steel pipe (e = 0.00015 ft) which has an ellipsoidal cross section (flow area = 4 ft^2; wetted perimeter = 8 ft); three standard elbows (K = 0.9 per elbow); a globe valve (K = 10); and a re-entrant pipe entrance (K = 1). What is the difference in reservoir elevations for 20 cfs?

2.What size galvanized iron pipe (e=0.0005ft) is required to carry a flow of 5 cfs of water at 60 degrees F (v=1.217X10^-5) without exceeding a head loss of 5.0 ft/100ft of pipe?

Reference no: EM13536754

Questions Cloud

Find the lengths of all three sides : The hypotenuse of a right triangle is 10 ft longer than the shortest side. If the sum of the lengths of the two legs is 35 ft, find the lengths of all three sides.
Find the center and radius of the circle : If $5,000 is invested in a savings account with an interest rate of 9%, coumpounded annually, the amount in the account after t years is given by
Hsbc bank of australia : HSBC Bank of Australia
What thickness of hma would be required to carry the same : What thickness of HMA would be required to carry the same traffic (computed in B) if there is a loss of serviceability due to frost heave of 0.8? Assume that the thickness other two layers would not be changed.
What size galvanized iron pipe is required to carry a flow : What size galvanized iron pipe (e=0.0005ft) is required to carry a flow of 5 cfs of water at 60 degrees F (v=1.217X10^-5) without exceeding a head loss of 5.0 ft/100ft of pipe?
How to write the introduction of the essay : How to write the introduction of the essay.
How many truckloads of trucks hauling an average volume of : How many truckloads of trucks hauling an average volumeof 6 LCY (4.6 LCM) would be required to haul 1 million CCY (764, 600 CCM) of gravel to a dam site?
Strategy affects the organization and type of applicant pool : Discuss non-traditional inducements organizations are using on how this strategy affects the organization and type of applicant pool it
Discuss if you are going or not to stabilize the slope –why : Given that that there is no budget to built any type of artificial protection enclosure or retention wall but you still have some allowance for using earthmoving equipment, which of the techniques discussed in class would appropriate in case slope pr..

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Determine the value of trelease and acceleration of boxes

Knowing that as a box B is released, the preceding box A has slid 6 meters down the slope and that 1 second later they are 10 meters apart, determine the following: (a) The value of trelease (b) The acceleration of the boxes.

  Determine what is the pressure in the system in h2o

if a manometer incline at 45 degrees containing a fluid with specific gravity of a 2.0 using it to measure the pressure in a system, and the fluid levels rise 30 inches. What is the pressure in the system in Lbf/In^2 and H2O

  Determine the final speed of the cart

Two men A and B, each having a weight of 160lb stand on a200lb cart. Each runs with a speed of 3ft/s measured relativeto the cart. Determine the final speed of the cart if:

  What is the concentration of hypochlorite ion in mg per l

If 5 mg of NaOCl are added to one liter of water and the pH is measured to be 7.8, what is the concentration of hypochlorite ion (OCl-) in mg/L

  Determine what is the acceleration of diatomic oxygen gas

2 kilomoles of diatomic oxygen gas are enclosed in a 10-kg steel container. A force of 2kN now accelerates this system. What is the acceleration

  Determine the rate of work done by the fan

standard air is drawn from the atmosphere into a 1.25 m diameter cylindrical duct by a fan mounted inside the duct. This air is discharged down stream from the fan through a 0.6 m diameter duct at a velocity of 25 m/s and atmosphere pressure.

  Compute the new thickness of sand over extra strata

A 1.20-m thick strata of sand has a void ratio of 1.81. A contractor passes a vibratory roller over this extra strata, which densifies it and reduces its void ratio to 1.23. Compute its new thickness.

  What power is needed from the pump on the water

The total length of the hose is 65 m with 200-mm diameter. The exit diameter of the nozzle is 100 mm. Take e/D for the hose as 0.0001. What power is needed from the pump on the water

  Calculate the height of the model on the crest

The spillway section is 40 feet high, its crest length is 60 feet and the maximum discharge is 3,000 CFS when the head on the crest of the spillway is 5 feet. Using a model scale of 1:10, calculate the height of the model.

  Calculate the change in entropy of a gas of mass

calculate the change in entropy of a gas of mass 8kg when 100 kj of heat energy is supplied to the gas. the temperature of the gas remains constant at 100 c during the heat transfer process

  What contour interval will be drawn if 50ft interval is used

An area that varies in elevation from 463ft - 634ft is being mapped. What contour intervals will be drawn if a 50ft interval is used. Which lines are emphasized.

  How to plot the shear and moment diagrams for the beam

Given simply supported beam with an overhang. The beam is 12 inches wide by 24 inches deep, and the slab is 6 inches deep. use a roof live load of 20 psf, and a concrete density of 150 pdf. the beams are spaced 15 feet apart.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd