Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Question 1. Demonstrate that in a Modified Ludzack-Ettinger (MLE) Process for nitrogen removal, the efficiency of total nitrogen removal is a function of the internal recycle rate and of the return activated sludge (RAS) flow rate. You can assume that the efficiency of nitrification is 100% in the aerobic stage and that the efficiency of denitrification is 100% in the anoxic stage. Indicate any other assumptions you make.
Question 2. Based on your analysis of part 1, what is the total nitrogen removal efficiency if the internal recycle rate is 3 times the influent flow rate and the RAS flow rate is half of the influent flow rate.
Verified Expert
The task file answered all questions related to the activated sludge system.The nutrient concentration during the removal was computed and justified.
A vertical curve is designed for 90 km/h and has an initial grade of +2.5% and final grade of -1.0 %. the PVT is at station 3+480. It is known that a point on the curve at station 3+440 is at elevation 75m. What is the stationing and elevation of the..
CVE80008 Building Design Assignment: Design of glazing facades. Determine the design wind pressures (for both strength and serviceability) for the building giving all assumptions made in reaching these pressures
Solubility of a substance which dissolves with an increase in volume and liberation of heat will be favoured by the A. low pressure and high temperature. B. low pressure and low temperature. C. high pressure and low temperature. D. high pressure and ..
Discuss how possible effects of crack tip plasticity (under conditions of plane strain and small-scale yielding) would modify the predictions of the model for fatigue crack deflection, Eqs. 14.23 and 14.24. (Hint: See the discussion in Section 9.1..
Shiny, metallic balloons have festive printed patterns that are produced by printing screens and are then plated onto the balloons. How can metallic coatings be plated onto a rubber sheet?
The vertical reactions a supports A and B for the feame are 13 kip and 37 kip, respectively. Determine the magnitude of the forces F1 and F2. Also, determine the horizontal reaction at A.
A rigid-walled cubical container is completely filled with water at 40 0F and sealed. The water is then heated to 100 0F. Determine the pressure that develops in the container when the water reaches this higher temperature
An automobile that you are looking at purchasing has an advertised fuel mileage of 30 miles per gallon. You rent the car for a week and track your mileage to school and back home and get (miles/gallon):
The exit nozzle in a jet engine receives air at 1200 K, 150 kPa with negligible kinetic energy. The exit pressure is 80 kPa, and the process is reversible and adiabatic. Use constant specific heat at 300 K to find the exit velocity.
The emission rate of radon into the crawl space is reported to be 0.6 pCi/m^2-s. An exhaust system was added to provide 1 air exchange per hour (ACH) in the crawl space. The outdoor concentration of radon is 1 pCi/L.
When the total pressure acting at midheight of a compressible clay layer is 100 kN/m^2, the corresponding void ratio is 1.09. When the total pressure increases to 400 kN/m^2, the corresponding void ratio decreases to 0.89.
A plane flow field is developed by the addition of a free vortex and a uniform stream in the positive x direction. If the vortex is located a distance a from the origin, determine the pressure variation in the flow field
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd