What is the temperature of the hot junction

Reference no: EM13302929

A copper-constantan thermocouple generates a voltage of 4.75 x 10-3 volts when the temperature of the hot junction is 110 °C and the reference junction is kept at 0 °C. If the voltage is proportional to the difference in temperature between the junctions, what is the temperature in degrees Celsius of the hot junction when the voltage is 1.87 x 10-3 volts?

Reference no: EM13302929

Questions Cloud

Calculate the percentage lost by the window : A wall in a house contains a single window. The window consists of a single pane of glass whose area is 0.11 m2 and whose thickness is 3 mm. what is the percentage lost by the window

What are the reasons that caused a decline in the shares : What are the reasons that caused a decline in the shares of depository institutions and increased in the shares of investment companies?

Estimate the peak flood tidal flow velocity at the location : As a tide enters a river and propagates upstream, the water depth at a given location is 3.7m . At this location the tide range is 1m . If the dominant tidal compeonent has a period of 12.4 hours, estimate the peak flood tidal flow velocity at thi..

How many units must be ordered in november : Projected sales for October, November, and December are 27,000 units, 29,500 units, and 32,500 units, respectively. How many units must be ordered in November?

What is the temperature of the hot junction : A copper-constantan thermocouple generates a voltage of 4.75 x 10-3 volts when the temperature of the hot junction is 110 °C, what is the temperature in degrees Celsius of the hot junction

Calculate touring enterprises weighted average cost : Calculate Touring Enterprises' weighted average cost of capital (WACC). Work as follows: first, compute the after-tax cost of debt, then compute the cost of equity. Cite both formulas, and show all your work.

Calculate the surface area of the clay particles : The surface area of clay particles can be determined by measuring the number of adsorbate molecules it takes to form a monolayer. The adsorbate molecules used for these measurements are usually N2 gas, therefore partial pressure "P" is used instea..

Compute the oxygen concentration at the interior end of tube : Insects do not have lungs as we do, nor do they breathe through their mouths. Instead, they have a system of tiny tubes, called tracheae, find the oxygen concentration at the interior end of the tube

What is the optimal solution : Formulate an LP model for this problem and implement your model in a spreadsheet and solve it - What is the optimal solution?

User Account

All Pages