What is the pressure drop if the new reynolds number

Assignment Help Mechanical Engineering

Reference no: EM13708879

A fluid is flowing in a pipe, the pressure drop is 12 psi per 1000 ft. We now double the flow rate, keeping other parameters constant. What is the pressure drop if the new Reynolds’ number is a) 10 and b) 10⁸?

Reference no: EM13708879

Questions Cloud

Volumetric flow rate-slip factor using stadolas equation : A centrifual pump is used to raise water against a static head of 18 m. The suction and delivery pipes, both .15m in diameter, have respectively, friction head losses amounting to 2.25 and 7.5 times dynamic head. The impeller, which rotates at 1450 r..

Determine the design point flow rate for the pump in gpm : A centrifugal water pump operates at 1750 rpm. The rotor geometry is shown in the sketch below. The inlet blade angle is 30 degrees and the exit blade angle is 90 degrees and the blade can be assumed to occupy negligible volume. Water enters with no ..

The compressor to compress the gas : A compressor is employed to compress gas flowing steadily through it . The gas enters the compressor at a temperature of 16°C, a pressure of 100 kPa, and with an enthalpy of 391.2 kJ/kg. The gas leaves the compressor at a temperature of 245°C, a pres..

Explain the control of the ignition process : Design an SI engine to operate on a six-stroke cycle. The first four strokes of the cycle are the same as a four-stroke Otto cycle. This is followed with an additional air-only intake stroke and an air-only exhaust stroke. Draw simple schematics, and..

What is the pressure drop if the new reynolds number : A fluid is flowing in a pipe, the pressure drop is 12 psi per 1000 ft. We now double the flow rate, keeping other parameters constant. What is the pressure drop if the new Reynolds’ number is a) 10 and b) 108?

Specific volume of superheated water vapor : If we want to find the specific volume of superheated water vapor, which below is the most accurate method:

Pressure difference from one end of the pipe to the other : A piping system consists of 300 ft of 2-in pipe, a sudden expansion to 3-in pipe and then 75 ft of 3-in pipe. Water is flowing at 125 gal/min through the system. What is the pressure difference from one end of the pipe to the other?

Determine the specific volume of superheated water vapor : Determine the specific volume of superheated water vapor at 15 MPa and 407Â°C, using the generalized compressibility chart. In m3/kg with four significant figures.

Evaluate the work done per unit mass of gas : A compressor is employed to compress gas flowing steadily through it. The gas enters the compressor at a temperature of 16°C, a pressure of 100 kPa, and with an enthalpy of 391.2 kJ/kg. The gas leaves the compressor at a temperature of 245°C, a press..

User Account

All Pages