Reference no: EM13262173
A horizontal turntable is made from a uniform solid disk and is initially rotating with angular velocity of 7.5 rad/s about a fixed vertical axis through its center. The turntable has a radius of 0.35 m and a moment of inertia of 0.15925 kg m2 about the rotation axis.
A piece of clay, initially at rest, is dropped onto the turntable and sticks to it at a distance d= 0.28 m from its center as shown in the figure. The final angular velocity of the turntable and the clay after the collision is 3.7 rad/s. Treat the piece of clay as a point particle and assume that there are no external torques acting on the system around the rotation axis.
1) Which of these quantities are conserved during the collision?
a. The total linear momentum of the clay and the turntable.
b. The total angular momentum of the clay and the turntable about the rotation axis.
c. The angular momentum of the turntable about the rotation axis.
d. The angular momentum of the clay about the rotation axis.
e. The mechanical energy of the clay and the turntable
2) What is the mass of the turntable?
3) What is the angular momentum of the turntable about the rotation axis before the clay is dropped?
4) What is the total angular momentum of the turntable and the clay about the rotation axis after the collision?
5) What is the total moment of inertia of the turntable and the clay about the rotation axis after the collision?
6) What is the mass of the clay?
7) If you wanted to slow the turntable as much as possible, you should drop the clay
a. At the outside edge of the turntable.
b. At the center of the turntable.
c. Midway between the center and outside edge.
Compute the mass deficiency in amu
: Calculate the mass deficiency in amu, binding enery in J/atom, and binding energy in MeV/nucleon for zinc-64, with an actual mass of 63.9291 amu.
|
What is the maximum speed during the motion
: A horizontal mass-spring system has low friction, spring stiffness 250 N/m, and mass 0.370 kg. The system is released with an initial compression of the spring of 10.8 cm, What is the maximum speed during the motion
|
What is the required return on the companys stock
: XXX is expected to maintain a constant 4.9 percent growth rate in its dividends, indefinitely. If the company has a dividend yield of 5.7 percent, what is the required return on the company's stock?
|
Determine the total mvar and the capacitance per phase
: Shunt capacitors are installed at the receiving end to improve the line performance. The line delivers 70 MVA, 0.8 lagging power factor at 64 kV. Determine the total Mvar and the capacitance per phase of the Y-connected capacitors.
|
What is the mass of the turntable
: A horizontal turntable is made from a uniform solid disk and is initially rotating with angular velocity of 7.5 rad/s about a fixed vertical axis through its center. What is the mass of the turntable
|
Explain what is its ph and the ka for acetic acid
: A buffer system contains .55 M acetic acid and .47 M sodium acetate. What is its pH? The Ka for acetic acid is 1.8x10^-5.
|
Determine the transmission line surge impedance zc
: Then, solve each Problem using hand calculations. A three-phase, 765-kV, 60-Hz transposed line is composed of four ACSR 1,431,000, 45/7 Bobolink conductors per phase with flat horizontal spacing of 14 m. The conductors have a diameter of 3.625 cm ..
|
Calculate the value of frazier stock
: Frazier Manufacturing paid a dividend last year of $2, which is expected to grow at a constant rate of 5%. Frazier has a beta of 1.3. If the market is returning 11% and the risk-free rate is 4%, calculate the value of Frazier's stock.
|
Explain what is the minimum cyanide concentration needed
: The Ksp for silver cyanide is 1.2x10^-8, the Ksp for zinc cyanide is 8.0x10^-12, and the Ksp for aluminum cyanide is 2.3x10^-21. What is the minimum cyanide concentration needed to precipitate each condition
|