What is the level of service expected in each direction

Assignment Help Civil Engineering
Reference no: EM13310644

A Class I rural highway segment of 10 miles in level terrain has a base free-flow speed (BFFS) of 65 mph. The cross section has 12-ft lanes and 6-ft clear shoulders on both sides of the road. There are an average of 20 access points per mile along the segment and 20% of the segment consists of "no-passing" zones. Current traffic on the facility is 800 vph, with 10% trucks and no RVs. The directional distribution of traffic is 70/30, and the PHF is 0.87. Using a directional analysis, what is the level of service expected in each direction on this segment?

Reference no: EM13310644

Questions Cloud

Produce a fairly comprehensive product : The Technical Journal assignment for the Linux class is not a typical assignment and this document is certainly not a typical "template" to facilitate the assignment.
Determine the peak hour los of richmod highway : A new section of richmod highway is being designed as a six-lane facility (three in each direction) with a two-way, left-turn lane. Determine the peak hour LOS. Assumed base free flow speed = 55mi/h
How will the concentration of solute change in the water : Some organisms live in shallow ponds, where much of the water will evaporate during the warm, sunny, summer months. How will the concentration of solute change in the water druing this time
Determine what horsepower must be supplied to the pump : A pump of 80% efficiency lifts water from one large open tank to another; the difference in water surface elevations is 20 feet. The pipe is relatively smooth (f = 0.0122), and has 3 elbows, each with a loss coefficient of 2/3.
What is the level of service expected in each direction : A Class I rural highway segment of 10 miles in level terrain has a base free-flow speed (BFFS) of 65 mph. The cross section has 12-ft lanes and 6-ft clear shoulders on both sides of the road.
How large is the net force acting on the boat : A certain speed boat weighs 5,880 N. It can accelerate from 0 to 40 m/s in 5 seconds. (Need to see the math). How large is the net force acting on the boat
What he would have to prove to establish a claim : James is a rising ice hockey star. He is 19 years old and his future is looking very bright. He is very excited about being selected to play in a representative team and wants to do everything to maximise his chances of achieving this goal. He knows ..
Decision and a description of a specific macroeconomic event : PowerPoint presentation 6-8 slides that explains the main difference between microeconomics and macroeconomics, with an example of each phenomenon, along with a description of a microeconomic decision
Find the velocity of the combined bodies : A 60 kg car moving towards the right at 5 m/s collides head on with an 50 kg car moving towards the left at 6 m/s, find the velocity of the combined bodies

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Determine the stations and elevations of pvcs and pvis

Using a design speed of 50 mi/h, determine the stations and elevations of PVCs, PVIs, and PVTs of the two vertical curves required to connect the highway segments, as well as the length of the constant grade section (connecting grade is to be as s..

  What is the heat rejection for the condenser in btu per h

Consider a small simple Rankine Power cycle which produces 600kW power from an electric generator with an efficiency of 95%. The steam leaves the boiler at 1250psia as superheated steam and leaves the turbine at 2 psia with a quality of 90%.

  Determine how deep will the water be on the flash boards

The pipes holding the boards were placed 10 ft apart across the dam. There were 20 pipes and each one was designed to fail under a bending moment of 1625 ft-lb how deep will the water be on the flash boards when failure occurs

  What is the minimum amount of carbon needed for absorber

You are assined the task of process design for a fixed-bed carbon adsorber system. You are given the following data: the inlet airstream flows at 5000 acfm (at 95 degrees F and 1 atm) and contains .2% n-pentane by volume

  Find which is produced with emphasis on temporal distributn

You are assigned the task of using bioremediation to cleanup a hazardous waste site contaminated with Tetrachloroethylene. The site is a shallow surficial sandy aquifer 30 feet deep underlain by a clay unit. The depth to the watertable is 10ft.

  Calculate total mass of sludge dry solids generated per day

The flow rate of the treatment plant is 2,000 m3/d. a. Calculate the mass of sodium bicarbonate (NaHCO3) that would be required per day to replace the alkalinity consumed.

  Determine the maximum in-plane shear stress on the wall

a). Determine the state of stresses in the walls and indicate these stresses (including arrows to denote the direction of the stresses) on the element below. b). Then, determine the maximum in-plane shear stress on the wall of the pipe using Mohr's..

  Calculate the space-mean speed in mile per hour

If there are 50 vehicles on a 4000-ft highway lane and the average time headway between two adjacent vehicles is 2.2 seconds. A) Calculate traffic density in vehicle/mile (vpm) and average space headway in feet/vehicle (fpv).

  Design an earthen channel section into sandy soil

An earthen channel will be excavated into sandy soil for which Vmax = 4.0 ft/sec, n = 0.022, and the recommended m = 3. The channel will have a bottom slope of 0.0011 and accommodate a design flow of 303 cfs. Design (size) the channel section.

  Why the prediction are less than the observed result

why the prediction are less than the observed result of connection in tension experiment?

  Find specific weight and total moisture content of sample

A sample of dry sand with a specific gravity total of 16.49 kN/m3 and a relative density of 2.67 grains, is placed outdoors. During a rainy period, the sample volume remains constant but the degree of saturation increases to 40%.

  Determine the normal depth-critical depth and velocity

A PVC pipe with a diameter of 30 inches will carry a flow of 20 cfs. the bottom slope is 0.005 and the roughness coefficient is 0.015. determine the normal depth, critical depth, velocity and the froude number.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd