What is the estimated uncertainty in the length of this

Assignment Help Civil Engineering
Reference no: EM13549252

1.A pump has the following pump curve is pumping at a rate of 5000gpm. Calculate

(a) the total head the pump is pumping against.

(b) brake horsepower required to drive the pump.

(c) pump efficiency. or any idea on the formulas

2.The base line vector between the base and roving reciever is 8340m and has an accuracy of +/-(1to 2 cm +/-2ppm). What is the estimated uncertainty in the length of this vector?

3.A storage pile of crushed rock is 100ft by 100ft square at its base and 50 ft by 50 ft square on the top. The pile is 25 ft high. What is the volume of rock in the rock pile? answer is 5787 CY can anyone explain this?

Reference no: EM13549252

Questions Cloud

How many gallons would be required to last the same time : How many gallons would be required to last the same time as the gas? The sodium hypochlorite solution strength is 15 percent by weight and has the same unit weight as water (specific gravity 1.0). One pound of sodium hypochlorite has the same disinfe..
What concentration would correspond to a risk : The drinking water standard for dioxin is 3 x 10-8 mg/L. Using EPA exposure factors for residential consumption, what lifetime risk would this pose? What concentration would correspond to a risk of 10-6? The following data and assumptions apply: Data..
What is the volume of the lake in cubic feet : A shallow lake can be considered a CFSTR. Nitrification, the conversion of ammonia to nitrate (NH3 -> NO3-) occurs in the lake according to first – order kinetics. One stream feeds the lake and one stream empties the lake with the flow rate in both b..
Friction between the floor and the base of the ladder : Modify function random0 so that it can accept 0, 1, or 2 calling arguments. If it has no calling arguments, it should return a single random value. If it has 1 or 2 calling arguments, it should behave as it currently does.
What is the estimated uncertainty in the length of this : The base line vector between the base and roving reciever is 8340m and has an accuracy of +/-(1to 2 cm +/-2ppm). What is the estimated uncertainty in the length of this vector?
What is the terminal settling velocity of a particle with : What is the terminal settling velocity of a particle with a specific gravity of 1.4 and a diameter of 0.01 mm in 20 degrees celcius water?
Use the gamma of water is equal to 1000 kg/m^3 : A horizontal 150mm pipe, in which 40 l/s of oil (S=.8) is flowing, contracts to a 75 mm diameter (left to right). If the pressure in the 150mm pipe is 300kPa, calculate the magnitude and direction of the horizontal force exerted on the contraction
Write an m-file to calculate the factorial function of n : Write an M-file to calculate the factorial function of N!, as defined by: N!=1 N=0 N!=N*(N-1)*(N-2)*...*3*2*1 N>0 The MATLAB code to calculate N factorial for positive value of N would be
Determine if the heat pump is reversibl, irreversible : A heat pump is used to heat a room where the outside temperature is -10°C. If the heat pump requires a power input of 2 kW, and the room requires a heat input of 15 kW to maintain the temperature at 25°C,

Reviews

Write a Review

Civil Engineering Questions & Answers

  Size the pipe to the nearest inch

Solve the problem using the Darcy Weisbach equation and the Colebrook-White equation.  Size the pipe to the nearest inch.  Assume the water temp is 80 degrees F.

  Determine the outlet area and velocity to compress helium

A steady-flow compressor is used to compress helium from 15 psia and 70oF at the inlet to 200 psia and 600oF at the outlet. The outlet area and velocity are 0.01 ft2 and 10 ft/s

  Determine what diameter should the spherical balloon have

A balloon is to be used to carry meteorological instruments to an elevation of 15,000 ft where the air pressure is 8.1 psia. The balloon is to be filled with helium, and the material from which it is to be fabricated weighs 0.01 lbf/ft^2.

  Explain how to estimate the amount of rainfall for gauge x

The rain¬fall amounts at three adjacent stations A, B, and C were 4.2, 3.7, and 4.9 in., respectively. The average annual precipitation amounts for the gauges are X = 36.5, A = 42.1, B = 37.1, and C = 39.8 inches.

  Design a concrete footing to support a 16in by 16 in column

Design a concrete footing to support a 16in by 16 in column that is 13 feet high with f'c= 6000 psi. The footing has a f'c=3000psi. Assume the the footing base is 5 ft below the grade and the soil is 100 lb/ft with an allowable pressure of 4500lb/ft ..

  Find method to compute the flexural stresses for the load

Assume the section has cracked and use the transformed area method to compute their flexural stresses for the load. Given: Beam 30 ft long with uniform load of 2 k/ft and a point load of 30 k at 10 ft.

  Estimate the mass of rust formation for rebar during a year

Estimate the amount of Ca(OH)2(s) leached from concrete during a one-year period by precipitation. Assume that the area receives 40 in/yr of precipitation which is in equilibrium with PCO2= 10^-3.5 atm and [SO42-] = 10^-4 M

  The temperature of steam at the inlets of both turbines is

An ideal reheat rankine cycle operates between the pressure limits of 20 kPa and 10 MPa, with reheat occuring at 3 MPa. The temperature of steam at the inlets of both turbines is 500 C

  Determine the flow rate above the pipe

A 2-inch diameter glass pipe is connected to a pipe network in which the pressure is 70 psig. If the length is 300 feet and the outlet is 10 feet above the pipe, determine the flow rate.

  Write a c code for two classes one being automobile

write a c++ code for two classes one being automobile and one being motorcycle both being the base class then at least one derived class from each

  Draw to scale the streakline-path-line of the particle

A dye streak was started at a point in the flow field at time t=0, and the path of the particle in the fluid was also traced from that same point starting at the same time. Draw to scale the streakline, path-line of the particle

  Determine the temporary hardness and permanent hardness

A well water has the following mineral contents in mg/L: Na+=20; K+=35; Ca+2 =15; Mg+2 =10; Sr=0.5; Cl- =40; HCO3- =65; CO3-2=5; SO4-2=15; and NO3=10.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd