Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
If the geodetic azimuth of a line is 18°47'20.1", the convergence angle is -1°08'06.8" and the arc-to-chord correction is -1.5", what is the equivalent grid azimuth for the line?
A 24-inch pipeline branches into a 12-inch and an 18-inch pipe, each of which is 1 mile long, and they re-join back into a 24-inch pipe. If the flow rate is 30 CFS in the main pipe, how will the flow divide, assuming tha
Water at 20ºC flows at a velocity of 2 m/s in a 200-mm diameter horizontal ductile-iron pipe. a) Estimate the friction factor in the pipe, and state whether the pipe is hydraulically smooth or rough
Write a detailed set of instructions (algorithm) for replacing the tire and inner tube on the front wheel of a ten-speed bicycle. The bicycle has caliper brakes that must be loosened unless the tire is not inflated.
Assume that the service station must fill refill the tank with 4.00 m^3 of gasoline once a week.Draw a mass balance diagram and estimate the annual loss of gasoline vapor (in kg/y) for the splash fill method
According to the design philosophy in the AASHTO Specifications, how does a heavy truck parked on a prestressed bridge girder effect the nominal shear resistance of the girder?
A balloon is to be used to carry meteorological instruments to an elevation of 15,000 ft where the air pressure is 8.1 psia. The balloon is to be filled with helium, and the material from which it is to be fabricated weighs 0.01 lbf/ft^2.
a low rate trickling filter plant gives 95% BOD5 removal. the primary clarifier removes 33% of the BOD5 applied to it. the secondary sludge amounts to 0.029lb dry solid/cap-day. if the raw wastewater has a BOD5 of 0.17lb/cap-day.
Assume the collector provides this energy to a thermal storage unit (a thermal reservoir) at 220oC. A heat engine receives energy from this thermal storage unit and discharges energy by heat transfer to the surroundings at 20 C
The channel, which will be unlined, is to carry discharge of 1250 cfs under uniform flow condition and the velocity is not to be exceed 5 ft/sec. Design for the maximum allowable slope pf the channel bed.
Forces F and P have magnitudes of F=40 lb. and P= 60 lb., Using the paralellogram law, determine the magnitude of the resultant R and the angle theta it makes with the horizontal. The given angle is 40 degrees.
A new development is to be constructed in Mexico City. Due to the large subsidence, the elevation at the proposed site must be raised prior to construction. The total volume of soil needed to raise the site is 100,000 cubic yards.
the engine develops a maximum torque of 210ft-lb at 3600 rev/min. what is the maximum grade this vehicle could ascend, on a paved surface, while the engine is developing maximum torque (assume that the available tractive effort is the engine-gener..
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd