What is the elevation of the curve at station of the pvi

Assignment Help Civil Engineering
Reference no: EM13308349

An equal-tangent crest curve connects a +2% initial grade with a -1% final grade, and is designed for 55 mi/h. The station of the PVI is 233 + 40 with elevation 1203 ft. What is the elevation of the curve at station 234 + 00?

Reference no: EM13308349

Questions Cloud

Draw the logic diagram of a four-bit binary ripple countdown : Draw the logic diagram of a four-bit binary ripple countdown counter(count from 15,14,13,...,0), using D flip-flops that trigger on the NEGATIVE edge of the clock.
Stakeholders of a firm impact that firm''s overall success : Determine ways in which the vision, mission, and stakeholders of a firm impact that firm's overall success.
Use a block diagram for the decoder : Implement the circuit with a 3x8 decoder and OR gates. Use a block diagram for the decoder.
Determine the temperature of the environment : Scientists in a laboratory produce a sound wave in a simulated environment (air) with a velocity of 448 m/s.
What is the elevation of the curve at station of the pvi : An equal-tangent crest curve connects a +2% initial grade with a -1% final grade, and is designed for 55 mi/h. The station of the PVI is 233 + 40 with elevation 1203 ft.
Determine the velocity of a wave on this bungee cord : A bungee cord is stretched between two poles with a force of 390 N. What is the velocity of a wave on this bungee cord
Find velocity of electron that falls through magnetic field : What is the velocity of an electron that falls through a magnetic field aligned electric potential of volts across an accelertion region that is 10 k long
What is the speed of the heaviest star : The two stars in a binary star system have masses 1.9 x 10^30kg and 6.1 x 10^30kg. What is the speed of the heaviest star
Determine what is the force acting on the plunger : A plunger applies pressure to the water. If, with zero force, the initial length of the water column is 25.00 in, what will it's length be if a force of 420lbs is applied to the plunger. Assume no leakage and no friction.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compute the station and elevation of the curve turning point

Set up a table showing curve elevations at the PVC, at the PVT, and at the half-station points along the curve. Compute the station and elevation of the curve turning point.

  Determine what is the radial-horizontal stress at the point

A tire carries a 5,000-lb load and has a pressure of 100 psi. The pavement has a modulus of elasticity of 43,500 psi. A deflection of 0.016 inches is observed at a point on the pavement surface 0.8 inches away from the tire load.

  What size square conduit is needed to transport

A 30mm pipe X 460mm rectangular duct carries air. What size square conduit is needed to transport 4m cube per sec of water at a distance of 45m and head loss of of 1.08m.

  Find the station and elevation of the low point of the curve

On a certain highway a -6% grade meets a +2% grade at station 70 + 00, elevation 550.97 ft. An equal tangent vertical curve, 800 ft. long, is to be installed to connect these two grades.

  Determine the horizontal and vertical components of reaction

The winch consists of a drum radius 4 in., which is pin connected at its center C. At its outer rim is a ratchet gear having a mean radius of 6 in. The pawl AB serves as a two-force member (short link) and keeps the drum from rotating.

  Determine what is the void ratio of the soil

A natural deposit of soild was found to have water content of 20% and to be 90% saturated. What is the void ratio of the soil

  Arrival of vehicles according to a poisson process

At a specified point on a highway, vehicles are known to arrive according to a Poisson process. Vehicles are counted in 20-second intervals, and vehicle counts are taken in 120 of these time intervals.

  Determine the pressure difference between a and b

Fluids A and B ave specific gravities .75 and 1.00 respectively. If the mercury is used as manometer liquid determine the pressure difference between A and B

  What is the theoretical rate of moisture removal from grain

A model grain dryer is being used to investigate the drying process. It is discovered that the load cell which supports the dryer indicates that the mass of the dryer and its contentsinitially increases during the heat-up.

  Find the magnitude and direction of the friction force

Determine whether the block shown is in equilibrium and find the magnitude and direction of the friction force when theta=30 and P=150N

  How much effort force is required to travel up

if a person and a wheelchair weigh 185 lbs how much effort force is required to travel up a ramp whose slope of 24.08 ft.

  Determine what should the after burner temperature be

An afterburner has been selected to destroy 99.9% of the ethane (CH3-CH3)in a gas (mostly air) stream . if the residue time is 0.8 seconds and the pressure is 1.1 atmospheres in the after burner,

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd