### What is the effective load resistance of the secondary coil

Assignment Help Physics
##### Reference no: EM13544765

A transformer consists of 300 primary windings and 832 secondary windings. 1. If the potential difference across the primary coil is 22.5 V , what is the voltage across the secondary coil? 2. If the potential difference across the primary coil is 22.5 V , what is the effective load resistance of the secondary coil if it is connected across a 110 ohm resistor?

### Previous Q& A

#### What will be the current in the secondary coil

You need a transformer that will draw 16 W of power from a 220 V (rms) power line, stepping the voltage down to 12 V (rms) What will be the current in the secondary coil? Express your answer to two significant figures and include the appropriate un..

#### Current in the circuit to reach half of its maximum value

A 1.80 mH inductor is connected in series with a dc battery of negligible internal resistance, a 0.840 k-ohm resistor, and an open switch. How long after the switch is closed will it take for the current in the circuit to reach half of its maximum..

#### What is the angular frequency of the charge oscillations

A 18.0 uF capacitor and a 5.40 mH inductor are connected in series with an open switch. The capacitor is initially charged to 6.50 uC. What is the angular frequency of the charge oscillations in the capacitor after the switch is closed?

#### Explain why the periscope no long works

A periscope for a submarine uses two totally reflection 45°-45°-90° prisms with total internal reflection on the side adjacent to the 45° angles. It springs a leak, and the bottom prism is covered with water. Explain why the periscope no long works. ..

#### What is the self-inductance of this solenoid

An ideal toroidal solenoid has a cross-sectional area of 0.500 cm^2 , a mean radius of 15.0 cm , and 1600 turns. What is the self-inductance of this solenoid?

#### What is the mutual inductance of combination of two coils

A 10.0 cm -long solenoid of diameter 0.400 cm is wound uniformly with 800 turns. A second coil with 50.0 turns is wound around the solenoid at its center. What is the mutual inductance of the combination of the two coils?

#### About the bottom end of rod after being given slight nudge

A thin, cylindrical rodscript l=24.6cmlong with a massm= 1.20 kghas a ball of diameterd=10.00cmand massM= 2.00 kgattached to one end. The arrangement is originally vertical and stationary, with the ball at the top as shown in the figure below. The co..

#### Calculate the average force exerted on the block

A 10 g bullet moving 1000 m/s strikes and passes through a 2.0-kg block initially at rest, as shown. The bullet emerges from the block with a speed of 400 m/s. (a) (5 pts) How much energy was lost in the collision?

#### Emf device is placed across two resistors in series

When a 23.0-V emf device is placed across two resistors in series, a current of 14.0 A is flowing in each of the resistors. When the same emf device is placed across the same two resistors in parallel, the current through the emf device is 61.0 A. Wh..

#### What is the expansion coefficient of the combined rod

An aluminum rod 10.0cm long and a steel rod 80.0cm long are combined to form one rod with a total length of 90.0cm. The initial temperature of both rods is 15 degrees celcius. The expansion coefficient of aluminum is 2.4*10^5 and the expansion coeffi..

### Similar Q& A

#### Find the ratio r2/r1

At a distance r1 from a point charge, the magnitude of the electric field created by the charge is 345 N/C. At a distance r2 from the charge, the field has a magnitude of 120 N/C

#### What is the resultant work done on the car

A 1100 kg car increases it speed from 40 km/hr to 60 km/hr in 5 seconds. What is the resultant work done on the car

#### Define the equation for position as a function of time

A lead ball is dropped into a lake from a diving board 5.6 above the water. After entering the water, it sinks to the bottom with a constant velocity equal to velocity with which it hit the water. The ball reaches the bottom 5 after it is released..

#### Find the phase shift between the current and driving voltage

An RLC circuit of a 2 picoF capacitor, a 4.4 ohm resistor, Find the phase shift in radians between the current and the driving voltage

#### What is the angular position of the first bright fringe

In a double-slit experiment, slits separated by 1.260e-4 m are illuminated by a coherent 571 nm light source. What is the angular position of the first bright fringe

#### Determine the magnetic flux through the wall

A house has a floor area of 162.0 m2 and an outside wall that has an area of 40.50 m2. The earth's magnetic field here has a horizontal component of 2.550E-5 T, Determine the magnetic flux through the wall if the wall faces north

#### What is the acceleration at which the bucket drops

A 2Kg wood block is attached to a .3 g bucket by a massless string rests on the durface of and inclined plan of 20 degrees. the coefficient of friction between the block and the inclined plane are static friction is equal to .4 and kinetic frictio..

#### What mass object with a single extra electron

Earth has a net charge that produces an electric field of approximately 150 N/C downward at its surface. (a) What is the magnitude and sign of the excess charge.

#### Calculate the resulting charge on each capacitor

Capacitors C1 = 6.10 µF and C2 = 2.95 µF are charged as a parallel combination across a 250 V battery. Calculate the resulting charge on each capacitor

#### Determine the normal force exerted by the ground

In a cargo plane, the center of gravity must be between the front and rear landing gears in order to maintain a torque equilibrium. Determine the normal force exerted by the ground on the front wheel

#### How many ions travel through the channel during this time

A certain single ion channel is selectively permeable to K and has a resistance of 1.15 GOhms. How many K ions travel through the channel during this time

#### Compute the difference between these temperatures

The melting point of gold is 1173?C, and the boiling point is 2481 C. Compute the difference between these temperatures in Kelvin