What is the distance uncertainty at the surface of ellipsoid

Assignment Help Civil Engineering
Reference no: EM13310808

if a hand-held GPS unit locates a latitudinal position with an uncertainty of + - 0.02-seconds, what is the distance uncertainty at the surface of the ellipsoid.

Reference no: EM13310808

Questions Cloud

What is the speed of the arrow : A soldier has a huge contraption that notches a large 4 kg arrow (it looks more like a lance) in a massive bow and uses a winch system to draw the arrow back to set the bow. What is the speed of the arrow
Estimate the ground level so2 at a point of the power plant : A power plant emits 95 g/s of SO2 from an effective stack height of 60 m. The wind speed is 3 m/s and the solar insolation is slight. A) Estimate the ground level SO2 (ug/m^3) at a point 4 km directly downwind of the power plant
What is the speed of the cart before collision : A 202 kg cart runs into the rear end of a 103 kg cart that is stationary. what is the speed of the cart before collision
Evaluation will be based on insights demonstrated : Evaluation will be based on insights demonstrated, evidence of critical thinking, and competent writing skills.
What is the distance uncertainty at the surface of ellipsoid : if a hand-held GPS unit locates a latitudinal position with an uncertainty of + - 0.02-seconds, what is the distance uncertainty at the surface of the ellipsoid.
Find energy stored in the capacitor after glass is removed : A parallel plate capacitor of capacitance 4.1 uF has the space between the plates filled with a slab of glass with k = 2.9, Find the energy stored in the capacitor after the glass is removed
Outline and discuss the market targeting strategy : Question 1:Outline and discuss the market targeting strategy that you would recommend Snazzy implement for its new line of energy drinks. Provide rationale for your strategy choice? (Market targeting strategy.)
How to calculate the volume of a sample of carbon monoxide : Calculate the volume of a sample of carbon monoxide at -60.6°C and 801 torr if it occupies 29.4 L at 372 K and 189 torr.
At what angle is the escalator inclined above the horizontal : In a mall, a shopper rides up an escalator between floors. At the top of the escalator, the shopper turns right and walks 5.90 m to a store. At what angle is the escalator inclined above the horizontal

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Investigate the possibility of environmental problems

Investigate the possibility of environmental problems that faced by the area of disaster.

  How much more flow in cfs will be attained with project

If a 96-inch brick sewer (n = 0.015) is laid on a slope of 0.01% is set to be rehabilitated with GIPL (n = 0.01) that will need 2-inches all around it. How much more flow, in cfs will be attained with this project

  How much money is equivalent to lump sum with interest rate

how much money today is equivalent to lump sum of $100,000 in 20 years with interest rate of 6% per year compounded (a)monthly, (b)quarterly, (c)semiannually

  What rate of superelevation is required for the curve

A new interstate highway is being built with a design speed of 70 mi/h. For one of the horizontal curves, the radius (measured to the innermost cehicle path) is tentatively planned as 2500 ft. What rate of superelevation is required for this curve

  Prove that the fluid in the pipe will flow from a location

Assume that you have a constant diameter pipe that has no pumps or turbines connected to it.Prove that the fluid in the pipe will flow from a location with high piezometric pressure to one with low piezometric pressure.

  Determine speed at which student conducted her experiment

A student is trying to test the braking ability of her car determined that she needed 18.5 ft more to stop her car when driving downhill on a road segment of 5% grade than when driving downhill at the same speed along another segment of 3% grade.

  How to plot the shear and moment across the beam

Write the equations required to express the shear and moment along the entire length of beam. Use an origin at point A, and then repeat computations using an origin at point D. Plot the shear and moment across the beam.

  Discuss the dangers of optimization in terms of min section

Discuss the dangers of optimization in terms of minimum section to support loads. In other words, how would optimizing for bending stresses affect the shear capacity of a section

  Find what is the depreciation charges expect on the laptop

A laptop has a four year life span with an initial cost of $900 and $100 salvage value. According to the straight line method what is the depreciation charges you expect on the laptop

  Determine the minimum distance from the channel edge

Vehicular access to the Toronto Island Airport now involves the use of a small ferry, capable of carrying about 8 automobiles or an equivalent number of trucks, which operates across the 150 metre wide body of water known as the Western Gap

  Determine what is the convective acceleration midway

A nozzle is shaped so that the velocity of flow varies linearly from base to tip. Assuming quasi-one-dimensional flow, what is the convective acceleration midway if v-base= 1 ft/sec, v-tip = 4 ft/sec, and L=18"

  Determine the actual detention time observed in the field

Determine the actual detention time observed in the field of two circular settling tanks with depth 3.5 m that was designed to have an overflow rate not exceeding 60 m3/m2-day and a detention time of at least 2 hour.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd