### What is the change in it internal energy

Assignment Help Civil Engineering
##### Reference no: EM13207669

A gas is compressed at a constant pressure of 0.800 atm from 9.00L tp 2.00L. in the process, 400J of energy leave the gas by heat. (a) What is the work done on the gas? (b) What is the change in it internal energy?

#### Compute the stresses and deflections at the corner of slab

Compute the stresses and deflections at the corner of the slab according to Westergaard and Ioannides. Compute the stresses and deflections at the edge and interior accordin

#### What speed in mph is required

A steam locomotives had scoops installed that took water from a tank located between the tracks and lifted water into the tender. To lift the water 12 ft with a scoop, neglect

#### How do you get the equations for the elastic curve using

A grit chamber is designed for a flow-through velocity of 0.30 m/s, a depth of 0.9 m, and a length of 10.5 m. If inorganic particles have a specific gravity of 2.65, estimate

#### Estimate the maximum number of cars per hour as a function

Estimate the maximum number of cars per hour that can travel down two lanes of a highway as a function of speed (ie at 50, 60 , and 70 mph) .for safety purposes the cars mus

#### Determine acceleration of rod and reaction at a and b

The motion of the 2.5-kg rod AB is guided by two small wheels which roll freely in horizontal slots. If a force P of magnitude 8 N is applied at B, determine (a) the acceler

#### Determine what constricted width would be to force the flow

Given that uniform flow is subcritcal and there is a constriction in a rectangular channel, how do you determine what the constricted width would be to force the flow to be

#### Calculating largest tolerable internal crack length

Calculate the largest tolerable internal crack length for a 7075-T651 aluminum alloy component that is loaded to a stress one-half of its yield strength without catastrophic

#### A 100 lb door has a weight of 100 lbs and a center

A 100 lb door has a weight of 100 lbs and a center of gravity at point g. determine the resultant force at points A and B. Point B resists forces in the X and Y directions. Po