What is its density when saturated

Assignment Help Civil Engineering
Reference no: EM13539020

1.A dry sample weights 96.1 pcf. Gs=2.65

What is its density when saturated.

2.A saturated soil has a unit weight of 120 pcf and a water content of 32.5%. Determine the void ratio and specific gravity of the soil.

3.Prove that Ev=kP for an isentropic fluid process given that constant=P/p^k, where p is the density (roe), P is the pressure, k is the ratio of specific heats.

Reference no: EM13539020

Questions Cloud

Determine the self weight moment of inertia : Determine the self weight, moment of inertia, and cross-sectional areas for the following hot rolled standard section:
Find out the molar volume of carbon by using the density : Determine the molar volume (in cm^3/mol) of carbon (diamond) by using the density of diamond (3.51 g/cm^3) and the mass of a mile of carbon (12.01 g/mol)
What is the project financial break even point in units : What is the project's financial break even point in units?
What is the induced voltage between the wingtips : An airplane flies directly north at 200 m/s in a region where the vertical component of the earth's field is 40 µT, What is the induced voltage between the wingtips
What is its density when saturated : Prove that Ev=kP for an isentropic fluid process given that constant=P/p^k, where p is the density (roe), P is the pressure, k is the ratio of specific heats.
Determine by how much has the spring stretched : A modern sculpture has a large horizontal spring, with a spring constant of 274 N/m, By how much has the spring stretched
State what is the hcl concentration : Borax is used to standardize a solution of HCl. If 0.2334 g of borax requires 24.31 mL of HCl titrant, what is the HCl concentration
What is the average voltage induced in the loop : A loop of area 0.02 m^2 is perpendicular to a magnetic field which changes from 2 T to 1.5 T in a time of 0.4 sec. What is the average voltage induced in the loop
What is the final velocity of the first ball : Two 0.40kg soccer balls collide elastically in a head-on collision. The first ball starts at rest, and the second ball has a velocity of 3.5 m/s. What is the final velocity of the first ball

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  How much heat must be supplied to maintain desired temp

A small building that shelters a water supply pump measures 2 m x 3 m x 2.4 m high. It is constructed of 1- cm thick wood having a thermal conductivity of 0.126 W*m^-1*K^-1.

  Should the soil be compacted at the dry of optimum or at wet

A soil is to be compacted on a site and it is expected that the soil contains a high percentage of montmorillonite. Briefly explain the working principles of two tests that can be carried out to ascertain the presence of montmorillonite in the soil.

  Determine the ultimate bod and 5-day bod of the sample

A result of a 7-day BOD test performed on a sample from anoligotrophic lake was 10 mg/L. The base 'e' BOD rate constantdetermined from previous studies was estimated to be 0.10d-1.

  Determine the actual distance below the surface at velocity

Assuming the following equation represents the true distribution in the vertical, determine the actual distance below the surface at which the velocity, u, equals the depth-averaged velocity, U.

  Find what is the force of thrust in the horizontal direction

Water flows through the interior of a jet ski at 40ft^3/s. The water enters the boat at 75ft/s at an angle of 30 degrees to the water surface. The exit velocity id 85ft/s in the horizontal direction. The boat is in seawater at 60 degrees F.

  What is elevation of b by neglecting curvature and reaction

The line of sight of a level falls at a rate if 0.122ft/ 100 ft when the level bubble is centered. A backsight of 4.782 is taken on point A, which is at 75 ft from the level. the elevation of a is 425.238 ft.

  Determine what is the full capacity of the sewer

What is the full capacity of the sewer. At what depths of flow in the pipe are the velocities of flow equal to 0.6 m/s. Assume Mannings constant n = 0.013.

  Determine the bending moment in a rectangular beam

Determine the bending moment in a rectangular beam 2 in. wide and 4 in. deep, if the maximum bending stress is 20,000 psi.

  Determine what is the shortest height tank should be

An engineering student has been given the assignment of designing a hydraulic holding system for a hay baling system. The system has four cylinders with 120 mm diameter pistons with a stroke of 0.320 m.

  Find area of steel reinforcement required for concrete tbeam

Find the area of steel reinforcement required for a concrete T-beam for the following data; f'c = 3 ksi, fy=60 ksi,d=18 in, t= 4.5 in., bw= 10 in., bf= 36 in., 3/4" aggregate, and the section sustains a total factored bending moment 82 k-ft.

  Define is the plant in violation of the discharge limit

At a distance of 20 km downstream of the plant, the river has an ultimate CBOD of 10 mg/L. The state has set an ultimate CBOD discharge limit for the treatment plant of 2000 kg/day.

  Draw a flow net

Draw A flow net. Show flow lines, flow Channels, and Equipotential lines. Using flow nets, please provide an estimate of seepage rate below the dam. Your submittal will provide the basis for an environmental impact statement regarding the construc..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd