What is initial speed of electron if it stop just at surface

Assignment Help Electrical Engineering
Reference no: EM13272545

Two charged, parallel, flat conducting surfaces are spaced d = 2.10 cm apart and produce a potential difference ΔV = 500 V between them. An electron is projected from one surface directly toward the second. What is the initial speed of the electron if it stops just at the second surface?

Reference no: EM13272545

Questions Cloud

What is the yield on 2-year treasury securities : The real risk-free rate is 3.25%. Inflation is expected to be 1.75% this year and 5% during the next 2 years. Assume that the maturity risk premium is zero.
How much work is done by the electric field due to the sheet : (a) How much work is done by the electric field due to the sheet if a particle of charge q = +1.60 × 10-19 C is moved from the sheet to a point P at distance d = 3.38 cm from the sheet b) If the electric potential V is defined to be zero on the she..
What steps do vikki and tim need to take to prepare : What steps do Vikki and Tim need to take to prepare for retirement?
What level of pretax cost savings do we require : The device has an estimated Year 5 salvage value of $60,000. What level of pretax cost savings do we require for this project to be profitable?
What is initial speed of electron if it stop just at surface : Two charged, parallel, flat conducting surfaces are spaced d = 2.10 cm apart and produce a potential difference ΔV = 500 V between them. An electron is projected from one surface directly toward the second.
Building online communities and social networks : Identify and describe three of the most significant best practices for building online communities and social networks
Define if the response is periodic with period 4 seconds : 1. If x(t) is periodic with period 2.1 seconds and y(t) is periodic with period 2.4 seconds, is x(t)+y(t) periodic Why or why not 2. If x[n] is periodic with period 15 seconds and y[n] is periodic with period 10 seconds, is x[n]+y[n] periodic
Nomination process will produce a qualified nominee : Which groups of voters are typically most and least likely to vote, and why and how can the party be sure that the nomination process will produce a qualified nominee?
Determine the change in heat of the hot water : Suppose 28.5 kg of 87.5°C water is placed in contact with 28.5 kg of 11°C water. What is the change in heat (in J) of the hot water

Reviews

Write a Review

 

Electrical Engineering Questions & Answers

  Explain resisitive load

Resisitive load, A 4:1 step down transformer uses a 60Vac source on the primary windings.

  How a rare disease affects individuals in the population

Now assume that the doctor knows that 1 in 100 individuals with symptom G will have the rare disease, and he only orders the test when individuals have symptom G. Given that one of the doctor's patients tests positive.

  Determine the magnitude of the armature current

A 440-V three-hase Y-connected synchronous motor has a synchronous reactance of 1.5 ohms per phase. The field current has been adjusted so that the torque angle is 28 degrees when the supplied power to the motor is 90kW.

  Find what is the intensity level measured at a distance

When played, it produces a sound of 196 Hz. The wavelength of the wave on the guitar string is 1.28 m. A) What is the tension in the string B) If a speaker is using 25 W of power to produce the sound, what is the intensity level measured at a dist..

  Determine if there is a difference in compression strength

An engineering statistician wants to conduct a test to determine if there is a difference in the compression strength of two different manufactures of reinforced concrete columns.

  Find the speed of the sphere after the acceleration

The charge is release from rest and accelerate through a potential difference of 100000v. (a) Find the speed of the sphere after the acceleration. (b) if the sphere (which is already up to its max)is fired directly at a fixed (can't move) charge q..

  Determine exact resonance frequency if 1 of microstrip line

The relative dielectric constant of the printed circuit board (PCB) is 4 and the microstrip lines have a characteristic impedance of 80W. The length of the microstrip lines are 30mm and 45mm, respectively.

  Find the mass flow rate in sec at inlet and mass flow rate

steam flows through a turbine one inlet and two exits with know condition at the steady state ( hints: h1=3231KJ/kg, h2=2812 KJ/kg , specific volume (v)= 0.0994 m^3/kg , at p= 30 bars,v=0.4045m^3/kg, at p=5 bars, no potential and kinetic energy ch..

  What should gain of transmitting and receiving antenna be

To meet the signal-to-noise ratio of the receiver, the received power must be at least 10 µ W. Assuming the two antennas are aligned for maximum reception to each other, including being polarization matched, what should the gain (in dB) of the tra..

  Determine whether the system is stable or not

A system has a characteristic equation: q(s) = s3 + 20s2 + 5s + 100 = 0 Determine whether the system is stable using the Routh-Hurwitz criterion. Determine the roots of the characteristic equation.

  What is difference in angle between load voltage and current

a. A load consumes 150kW with a power factor pf = 0.7 (lagging). If the load current is 240A (RMS), find the load voltage. b. An industrial plant has an inductive load which consumes 10kW of power from a 220VRMS line.

  Find the average value of the function

A generator provides the following voltage signal: v(t) = 2 + 3 sin(100pi) + 4 cos(250pi). Find the average value of the function. Note: pi = 3.1416 in this equation.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd