What horsepower is required for the prototype

Assignment Help Mechanical Engineering
Reference no: EM131014875

1. A pendulum has an oscillation period T which is assumed to depend upon its length L, bob mass m, angle of swing ??, and the acceleration of gravity. A pendulum 1 m long, with a bob mass of 200 g, is tested on earth and found to have a period of 2.04 s when swing at an angle of 20 degree. A similarly constructed pendulum, with L=30 cm and m=100 g, is to swing on the moon (g=1.62 m/s2) at an angle 20 degree. What will be its period?

2. A prototype water pump has an impeller diameter of 2 ft and is designed to pump 12 ft3/s at 750 rpm. A 1-ft diameter model pump is tested in 20oC air at 1800 rpm, and Reynolds number effects are found to be negligible. For similar conditions, what will the volume flow of the model in ft3/s? If the model pump requires 0.082 hp to drive it, what horsepower is required for the prototype?

3. Your ME6666 Professor asks you to experimentally identify the parameters that determine the terminal velocity, vT, of spinning, smooth, aluminum spheres that are in free fall in different fluids. You suspect the possible parameters that affect the terminal velocity are: the initial spin rate ω, the fluid density ρ, the fluid dynamic viscosity μ, and the sphere density diameter D. Since the spheres are made of the same material, so the sphere density is not a parameter. You collect measurements for different sized material, different fluids and different spin rates, as shown below.

vT (m/s)

ω (1/s)

ρ (kg/m3)

μ (kg/(m.s))

D (m)

0.5

1500

1200

0.001

0.25

0.62

500

500

0.0002

0.1

4.22

2000

600

0.005

0.3

9.9

750

5

0.00005

0.15

64.7

1400

1.4

0.00003

0.05

After you have collected these data, one of your friends suggests that, in fact, the fluid viscosity isn't important; then another friend suggests that the spin rate isn't important. You decide to approach the problem using the dimensional analysis taught by the professor.

a. Determine the non-dimensional parameters that govern the problem if all of the parameters are important. Use ??, ?? and D as repeating parameters.

b. Determine the non-dimensional parameters that govern the problem if the fluid viscosity isn't important;

c. Determine the non-dimensional parameters that govern the problem if the spin rate isn't important.

d. Based on your experimental data, which of the parameters seems irrelevant? Explain.

Reference no: EM131014875

Questions Cloud

Although it may affect the firms capital structure : Financial theory says that the choice of how to pay for a merger is really irrelevant because, although it may affect the firm's capital structure, it will not affect its overall required rate of return. The basic rationale for any financial merger i..
Employers feel it necessary to monitor employees : Employers feel it necessary to monitor employees at the workplace because they have an obligation to their stakeholders to operate as efficiently as possible. With advances in technology, the availability of employees in the business environment is n..
Identifies and evaluates at least one aspect of the cause : The research question should be followed by a thesis, which answers the research question by stating a problem, cause, and solution. The thesis can be two sentences long if necessary.
Which price could it buy euros using dollars : The spreads on closing currency quotations for January 14, 2010 were. Assuming a bank could transact these, at which price could it buy euros using dollars? How many dollars could it get for 1 million Swiss francs?
What horsepower is required for the prototype : A prototype water pump has an impeller diameter of 2 ft and is designed to pump 12 ft3/s at 750 rpm. If the model pump requires 0.082 hp to drive it, what horsepower is required for the prototype
What is the length of cash conversion cycle : Prestopino Corporation produces motorcycle batteries. Prestopino turns out 1,500 batteries a day at a cost of $6 per battery for materials and labor. It takes the firm 22 days to convert raw materials into a battery. What is the length of Prestopino’..
Prominent consumer products firm : Star, Inc., a prominent consumer products firm, is debating whether or not to convert its all-equity capital structure to one that is 20 percent debt. Currently there are 17,000 shares outstanding and the price per share is $47. EBIT is expected to r..
Analyzing ethical dilemmas and case studies in business : 1. Make sure you have a grasp of all the available facts. 2. List any information you would like to have but don't and what assumptions you would have to make, if any, in resolving the dilemma.
Calculate a table of interest rates : Calculate a table of interest rates for 5 years based on the following information:

Reviews

Write a Review

 

Mechanical Engineering Questions & Answers

  Sketch the pv and ts diagrams for the cycle and determine

an air standard otto cycle has a compression ratio of 9.5. at the beginning of the isentropic compression the working

  The throat has a diameter of 3 cm and the propellant has a

a rocket has a nozzle which is expanded from a chamber pressure of 10 mpa to a pressure that is 23 of sea level

  The coefficient of kinetic friction between sled and ice is

a sled of mass m is given a kick on a frozen pond. the kick imparts to it an initial speed of 1.70 ms. the coefficient

  Find expressions for the induced transverse stresses

A cube of linear elastic material is subjected to a vertical compressive stress sigma1 in the 1-direction, but it is now constrained ( e = 0) in both the 2- and 3- directions. Find expressions for the induced transverse stresses, sigma2 and sigma3 in..

  Calculate the average velocity in each section

Air at 60° F and 40 psia is flowing in a 4" diameter pipe at 0.2 slugs/sec. The pipe undergoes a conversion to a 2" by 3" rectangular duct in which T = 150°F and P = 7 psia. Calculate the average velocity in each section.

  Air expands in a piston-cylinder device with a polytropic

air expands in a piston-cylinder device with a polytropic exponent of 1.3. the initial pressure and temperature were

  Determine the ratio of plastic to metal tube

Determine the ratio of plastic to metal tube surface areas needed to transfer the same amount of heat. Determine the ratio of plastic to metal mass associ- ated with the two heat exchanger designs.

  At the entrance of the air conditioning system determine

atmospheric air at 98 kpa and 30degc flows into an air conditioning system with a volume flow rate of 2 m3min. to

  Find the percentage of vibration received by the transmitter

An aircraft radio transmitter weighs 26 kg and is mounted on five springs with deflection 8 mm when the transmitter is placed upon them. Neglecting damping, find the percentage of vibration received by the transmitter for engine speeds of 1500 rpm..

  Determine the velocity of the mass

A 10-kg mass slides down a ramp inclined at 30o from the horizontal a total vertical distance of 3 m. Determine the velocity of the mass when it reaches the bottom, neglecting friction and air resistance.

  Determine percent increase in absolute temperature

Assuming the volume of the tire remains constant at 0.035 m3, determine the percent increase in the absolute temperature of the air in the tire.

  A pitot-static tube is placed in a subsonic air flow

A pitot-Static tube is placed in a subsonic air flow. The static pressure and temperature in the flow are 80 kPa and 12 oC respectively. The difference between the pitot and static pressures are measured using a manometer and found to be 200 mm of me..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd