What are the masses of gravel-sand and water per cubic meter

Assignment Help Civil Engineering
Reference no: EM13313346

The design of a concrete mix requires 1173kg/m3 of gravel in SSD condition, 582 kg/m3 of sand in SSD condition, and 157kg/m3 of free water. The gravel available at the job site has a moisture content of 0.8% and absorption of 1.5%, and the available sand has a moisture content of 1.1% and absorption of 1.3%. What are the masses of gravel, sand, and water per cubic meter that should be used at the job site?

Reference no: EM13313346

Questions Cloud

Find probability that vehicle pulling out will get accident : The driver of the vehicle does not look for oncoming traffic. Road conditions and vehicle speeds on the highway are such that it takes 1.5 seconds for an oncoming vehicle to stop once breaks are applied.
Compute the amount naoh that is acetic acid : Calculate the amount (in mL) of a 1.520M NaOH that is required to add the following acetic acid solutions to prepare a buffer with the corresponding pH: pKa of acetic acid = 4.74
With what speed is the kereru travelling after the collision : a kereru new zealand wood pigeon travelling at 1.5 m/s due west has an elastic collision with an airbus a380 aeroplane. with what speed is the kereru travelling after the collision?
What is product positioning : What is product positioning? Product repositioning? Why and when would Rollerblade need to reposition?
What are the masses of gravel-sand and water per cubic meter : The design of a concrete mix requires 1173kg/m3 of gravel in SSD condition, 582 kg/m3 of sand in SSD condition, and 157kg/m3 of free water. The gravel available at the job site has a moisture content of 0.8% and absorption of 1.5%
Door-to-door sales department and released all employees : A cable company closed its door-to-door sales department and released all employees of that department after settling a discrimination complaint by one of the department's employees.
How long is it before the rain will come to a complete stop : a 40 x 10^3 kg train is travelling at 8.3m/s when the engineer sees a sheep on the tracks. she throws the emergenxy brakes on. How long is it before the rain will come to a complete stop
Explain what is the ph of the equivalence point : What is the pH of the equivalence point of the two solutions if you then titrate these solutions separately with the NaOH solution? The Ka for acetic acid is 1.8e-5.
Determine discharge-q and depth of flow in the gutter : The continuity equation is just the water balance for the slope or any small portion of the slope and can be given as: p - fp = RO where i = rainfall rate, fp = infiltration capacity, and RO = runoff rate, all expressed as a depth per time

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find what is the major head loss in a coarse concrete pipe

What is the major head loss in a coarse concrete pipe with a diamter of 1ft that is 100 ft long. Water flows at a rate of 20 ft^3/s (viscosity of water = 2.344x10^-5 lbfs/ft^2, density of water = 1.94 slugs/ft^3) 1inch = 25.4mm

  Calculate factor of safety if the material does not yield

The program should use both the maximum shearing-strength criterion and the maximum-distortion-energy criterion. It should also print the values of the principal stresses and, if the material does not yield, calculate the factor of safety.

  What is stress to load ratio at depth of 2b below the centre

for a uniformly loaded square area, what is the stress to load ratio at a depth of 2B below the CENTER of the loaded area

  Determine the support reactions and the force in each member

The space truss shown is supported by a ball-and-socket joint at D and by short links at A and C. Determine the support reactions and the force in each member of the space truss.

  Importance of mineral identification in applications

What are minerals? Sketch different types of mineral crystal forms and list different types of rock forming minerals. Describe with examples the importance of mineral identification in engineering applications.

  Determine what is the pressure in cell that can be varied

Pure n-butane is contained in a laboratory cell in which the volume can be varied. The cell is maintained at a temperature of 200°F. The volume is changed until a few drops of liquid n-butane are present. What is the pressure in the cell

  What was involved in the first far-reaching

what was involved in the first far-reaching, comprehensive study of Earth's oceans?

  Average velocity and crosssectional area

Calculate the average velocity (rnps), crosssectional area (rn"), and depth (m) for the stretch. To make these estimates, assume that the stretch can be idealized as a rectangular channel.

  Give beam deflection solution

Beam Deflection Solution, Derive an expression for the deflection due to shear for a cantilever beam of constant rectangular cross section, under action of a point load, P at free end.

  Parallel tangents of a reversed curve

The perpendicular distance between two parallel tangents of a reversed curve is 20m. The azimuth of the back tangents of the curve is 270 00 and the azimuth of the common tangent is 310.

  Estimate the radon concentration in the crawl space

The emission rate of radon into the crawl space is reported to be 0.6 pCi/m^2-s. An exhaust system was added to provide 1 air exchange per hour (ACH) in the crawl space. The outdoor concentration of radon is 1 pCi/L.

  Specify the amount of convective acceleration

shaped nozzle such that the velocity along the center line of the flow increased from 1.5 m / s to 15 m / s at a distance of 37.5 m. specify the amount of convective acceleration at the beginning and end of the range.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd