Use the doubling time approximation to estimate

Assignment Help Civil Engineering
Reference no: EM13555163

The population in 1850 has been estimated at about 1 billion. World population reacted 4billion in 197

Use the doubling time approximation (3.5) to estimate the exponential rate of growth that would produce those numbers. Use the exponential growth equation (3.6) to find the growth rate

Reference no: EM13555163

Questions Cloud

Calculate the normal force n exerted by the side of the slot : The flat circular disk rotates about a vertical axis through O with a slowly increasing angular velocity ?. Prior to rotation, each of the 0.60-kg sliding blocks has the position x = 29 mm with no force in its attached spring. Each spring has a stiff..
Determine the shear stress at each wall and the maximum : Sketch and identify the Tresca (maximum shear stress) and von Mises (maximum distortion energy) failure criteria in two-dimensional principal stress space (i.e., ?2 vs. ?1) for the above material.
What are the northing and easting coordinates for station b : The coordinates for station A are 1023.34 N and 988.56 E. What are the northing and easting coordinates for station B that is located 40 feet due east of A, and 22.32 feet due south of A
Find the maximum allowable tensile force : A 4-cm- diameter rod of aluminum 7075-T6 is to subjected to an axial tensile force such that the factor of safety based on the yield stress on 1.75. Find the maximum allowable tensile force. The yield stress of the aluminum 7075-T6 is o-y= 500MPa.
Use the doubling time approximation to estimate : Use the doubling time approximation (3.5) to estimate the exponential rate of growth that would produce those numbers. Use the exponential growth equation (3.6) to find the growth rate
Determine the diameter of commercial steel pipe required : World population 10,000 years ago has been estimated at about 5 million. what exponential rate of growth would have resulaed in the population in 1850 , which is estimated at 1 billion ? had that rate continued , would the population have been in the..
What is the resulting solids concentration : Raw primary sludge at a solids concentraion of 4% is mixed with waste activated sludge at a solids concentration of .5%. The flows are 20 and 24 gal/min respectively.
What fraction of the flue gas stream would need to be bypass : An electrostatic precipitator for a coal-fired power plant has an overall particulate recovery of 95%. The company engineer decides that this is too good, that it is not necessary to be this efficient
What is the pressure difference measured by the manometer : The "U"-tube manometer containing mercury of density 13600 kg/cubic meters is used to measure the pressure drop along a horizontal pipe.

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Temporary change on the highway

Determine the minimum distance from the diversion that a road sign should be located informing drivers of the temporary change on the highway. The letter height on the road sign is 5 inches.

  Design a bar screen for a peak average flow

design a bar screen for a peak average flow of 0.46m3/s.you can consider reasonable assumptions.

  Determine the new depth of flow per second with a bottom

The discharge is 15 cubic meters per second with a bottom width=10m and side slopes of 1V:2H. If the discharge is increased to 20 cubic meters per second determine the new depth of flow

  Determine the speed of the car when time t is given

The 1.2-Mg mine car is being pulled by winch M mounted on the car. If the winch generates a constant power output of 30 kW, and the car starts from rest, determine the speed of the car when t = 5s.

  Detremine the cfat in year 0 for the challenger and defender

The defender had a first cost of $300,000, but its market value now is only $100,000. It has chargeable expenses of $120,000 per year and no expected salvage value. To simplify calculations, assume that SL depreciation was charged at $60,000 per y..

  Determine the deflection at the mid span of a simple beam

Determine the deflection at the mid span of a simple beam (wood joist) of a row house. The joist is designed as 2x12@16'' for DL = 12psf and LL=40 psf. The span length of the joist is 18'

  What is the mass of the fish

A fish hanging from the bottom of the spring oscillates vertically at a frequency of 2.00 Hz. Ignoring the mass of the spring, what is the mass of the fish?

  Derive the vector equation for the acceleration

Derive the vector equation for the acceleration of a particle in normal and tangental compontens. Begin with the velocity vector v=vut where v=ds/dt show all work including any convesion unit vectors.

  Determine the void ratio and specific gravity of the soil

A saturated soil has a unit weight of 120 pcf and a water content of 32.5%. Determine the void ratio and specific gravity of the soil.

  Determine the maximum power output of the pelton wheel

The Pelton wheel is 3.0 m in diameter, and the nozzle exit is 0.2 m in diameter. Determine the maximum power output of the Pelton wheel. Is a Pelton wheel the appropriate turbine type for this application

  How much calcium chloride will react with 100mg of soda ash

A 2.5hr long uniform rainfall resulted in arunoff hydrograph that has the shape of an equilateral triangle.The base of the triangle is 64hr; the peak flow is 535cfs; thedrainage area is 5.7mi^2. Determine the corresponding unithydrograph if the base ..

  Designing the tangent vertical curve

Due to a street crossing a roadway, the elevation of the roadway at station 3 +413.760 must be at 129.388 m. Design the curve?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd