Story building in order for major masonry rehabilitation

Assignment Help Civil Engineering
Reference no: EM13823273

Scaffolding is to be constructed on all faces of a six-story building in order for major masonry rehabilitation work to be performed. The exposed surface area of the exterior walls of the building has been estimated to be 423,000 sq. ft. Historical records of the company show that for this simple type of structure, the production rate for erecting scaffolding is 0.002 hours per square foot of building surface area. If 10 workers (working 8 hours days) are assigned to do the entire scaffolding erection, answer the following question?

How many worker hours are required to erect the scaffolding?

How many hours are required per worker?

What duration (in working days) should be used for this activity? Round up your answer to the nearest whole integer day. 

Reference no: EM13823273

Questions Cloud

Produces leather handbags : Albertville Inc. produces leather handbags. The production budget for the next four months is: July 5,000 units, August 7,000, September 7,500, October 8,000. Each handbag requires 0.5 square meters of leather. Albertville Inc.’s leather inventory po..
Rod readings are taken at the corners successively : A rectangular lot running N-S and E-W is 150 by 100 ft. To locate contours it is divided into 50-ft square blocks, and the following rod readings are taken at the corners successively along the E-W lines, proceeding from west to east, and beginning w..
Determination of earnings quality and persistence important : Earnings are extremely important to a publicly traded company and the creditors and investors of that company. However, looking at earnings without regard to the quality of those earnings is hazardous to the health of creditors and investors. Why is ..
Natural law school of jurisprudence : Which of the following is most consistent with the Natural Law School of jurisprudence?
Story building in order for major masonry rehabilitation : Scaffolding is to be constructed on all faces of a six-story building in order for major masonry rehabilitation work to be performed. The exposed surface area of the exterior walls of the building has been estimated to be 423,000 sq. ft. Historical r..
Determine the pertinent demographic social political factors : Determine the pertinent demographic, social, political, and economic factors about your chosen country. Examine the manner in which your chosen country's criminal code would likely view the crime you witnessed. Provide a rationale for the response. C..
Guideline for external monitoring-major changes in strategy : What pattern of behavior is most likely for a CEO who has been in office for 3-4 years? Which condition does not limit a chief executive's discretion to make major changes in the strategy of an organization? Which of the following was not given as a ..
A cantilever beam ab has a rectangular cross section : A cantilever beam AB has a rectangular cross section and is loaded by a force P at an angle α that acts at the centroid of the cross section. Two strain gages are placed at point C, which is at mid-height of the beam. Gage D measures the strain in th..
Water flows in a pipe in the physics : Normal 0 false false false EN-US X-NONE X-NONE Water flows in a pipe

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Determine how much he will weigh on the spring scale

An undisturbed chunk of soil has a wet weight of 62 lb and a volume of 0.56 ft3. When dried out in an oven, the soil weighs 50 lb. If the specific gravity of soilds is found to be 2.64

  What is the max length to which it may be stretched without

For an unknown alloy the stress at which plastic deformation begins is 400MPa and the modulus of elasticity is 120GPa. If the original specimen length is 76 mm

  Determine the smallest standard commercial pipe

For satisfactory operation, the static pressure at the pump inlet must not be lower than -6 m of water gage. Determine the smallest standard commercial pipe that will give the required performance.

  How much the boiling temperatures of water will vary as the

The atmospheric pressure at a location is usually specified at standard conditions, but it changes with the weather conditions. As the weather forecasters frequently state, the atmospheric pressure drops during stormy weather

  Determine by direct integration the polar moment of inertia

a) determine by direct integration the polar moment of inertia of the semiannular area shown with respect to point O b) Using the result of part a, determine the moments of inertia of the given area with respect to the x and y axes

  The basin dimensions if increments of 1.0 inch are used

A rapid-mixing basin is to be designed for a water coagulation plant, and the design flow for the basin is 4.0 MGD (million gallons per day). The basin is to be square with a depth equal to 1.25 times the width.

  What thickness of hma would be required to carry the same

What thickness of HMA would be required to carry the same traffic (computed in B) if there is a loss of serviceability due to frost heave of 0.8? Assume that the thickness other two layers would not be changed.

  What is the tensile stress at which yielding occurs

A single metallic crystal is oriented such that the normal to the slip plane and the slip directions are at angles of 50 and 40 degrees respectively, with the tensile axis

  Determine specific gravity if vol of the pot is 450ml

While washing up Grandma's old aluminum cooking pot I noticed that it would just barely touch the bottom of the sink if I added 2.5 cups of water to it. The pot is 3.5 in high and 9.5 in diameter. Thickness of aluminum is 3/16 in.

  Calculate the ratio of area to volume for unit cube

calculate the ratio of area to volume for unit cube a unit sphere in inscribed inside the cube, and as write cylinder inscribed inside the cube.

  Radius of the steel wire ehen stretching with other wire

The aluminium wire has a radius of 1.1mm. What must be the radius of the steel wire if it is to stretch the same distance as the aluminium wire, so that the two wires maintain equal lengths after the masses are attached?

  What is the percent change in its cross sectional area

The outside and inside diameters of 75 mm and 63 mm, respectively. A strain gauge is placed on the outside of the hollow segment of the tube to measure normal strains in the longitudinal direction. assume E=73 GPa and Poissons ration v=0.33. strai..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd