Stiletto heel has a semi-circular cross-section with radius

Assignment Help Mechanical Engineering
Reference no: EM13713157

A stiletto heel has a semi-circular cross-section with radius of 0.25 in. Due to walking over irregular surfaces and shifts in body weight, moments of up to 30 lb.-in. can act where the heel attaches to the shoe. Determine the maximum tensile or compressive stress in the heel. Explain all assumptions made.

Reference no: EM13713157

Questions Cloud

Reversible process has been defined as a process : A reversible process has been defined as a process, which having taken place, can be reversed and in so doing leaves no change in either the system or the surroundings. Six restrictions were imposed
Find distance d the collision is elastic inelastic : Block 1 of mass m1 slides from rest along a frictionless ramp from height h = 3 m and then collides with stationary block 2, which has mass m2 = 5m1. What is the value of distance d if the collision is Elastic inelastic.
Change in magnetic properties when steel is heated : Describe the theory used for the IZOD test and what units are used to report toughness? Explain the change in magnetic properties when steel is heated. Is this due to allotropic properties?
Mixture of air and water at a temperature : A mixture of air and water at a temperature of 30ºC and a pressure of 750 mmHg has a relative humidity of 75%. The wet gas is compressed to 40 psia and cooled to 20ºC. How many cubic meters of original gas were compressed if 0.75 lb of condensate (wa..
Stiletto heel has a semi-circular cross-section with radius : A stiletto heel has a semi-circular cross-section with radius of 0.25 in. Due to walking over irregular surfaces and shifts in body weight, moments of up to 30 lb.-in. can act where the heel attaches to the shoe. Determine the maximum tensile or comp..
Membrane made of an isotropic material : There is a membrane made of an isotropic material whose elastic modulus and Poisson's ratios are E and v, respectively. When this membrane is elongated along x-direction with no lateral deformation in y-direction, the apparent elastic modulus (E') de..
Calculate the number of elapsed days : Write a function that calculates the number of elapsed days between two dates. For example the days between Feb 3, 1970 and June 21, 1980? Becareful for the Leap year imediately.
Pumping power requirement to overcome this pressure drop : Water at 40 degrees Fahrenheit (p=62.42 lbm/ft3 and u= 3.74 lbm/ft. hr) is flowing through a 0.12 in (0.01 ft) diameter 30 ft long horizontal pipe steadily at an average velocity of 3 ft/s. Determine the head loss, pressure drop, and the pumping powe..
Pipes are horizontal bad viscous effects are negligible : Gasoline flows from a 0.25 m diameter pipe in which the pressure is 250 kPa, that contracts into a 0.125 m diameter pipe in which the pressure is 100 kPa. If the pipes are horizontal bad viscous effects are negligible, determine the flow rate (Q). (G..

Reviews

Write a Review

 

Mechanical Engineering Questions & Answers

  Oxygen-rich and virtually carbon-free environment

An iron-carbon alloy initially containing 0.55 wt% C is exposed to an oxygen-rich and virtually carbon-free environment at 1325 K. Under these conditions, the carbon diffuses from the alloy and reacts with oxygen at the surface.

  The temperature profile as a function of radial position

(a) The temperature profile as a function of radial position

  Draw and label a flow chart of the process giving the

a double effect evaporator is used in feed forward mode to produce fresh water from sea water vontaining 3.5wt

  Find the specific work and heat transfer estimate the

water at 1000 kpa 200c is brought to saturated vapor in a pistoncylinder with an isobaric process. find the specific

  The pressure acting on a 125 in2 test specimen equals 15

the pressure acting on a 1.25 in2 test specimen equals 15 mpa. what is the force in n acting on the specimen expressed

  Estimate the time intervals and uncertainties in measured

the mass flow rate of water in a tube is measured using a beaker to catch water during a timed interval. the nominal

  Determine the air velocity at the exit when the inlet

the exhaust nozzle of a jet engine expands air at 300kpa and 200oc adiabatically to 100kpa. determine the air velocity

  Compute the minimum possible radius of the specimen

A circular specimen of MgO is loaded using a three point bending mode. Compute the minimum possible radius of the specimen without fracture, given that the applied load is 5560N, the flexural strength is 165 MPa. and the separation between load po..

  A drill operation is to be performed with a 16 mm twist

a drill operation is to be performed with a 16 mm twist drill the hole is blind with a depth of 50 mm.cutting speed is

  A lap joint needs to be designed using 20-mm diameter

a lap joint needs to be designed using 20-mm diameter bolts to carry a load of 120 kn on the connecting plates. if the

  Computer programs and other software

Computer programs and other software (including Web Pages like this one). This includes graphics and icons and the like, which may also be "graphic works". OK, my work is on the list. How do I copyright it?

  What pulse frequencies will blade slots appear stationary

A rotating saw blade has 48 teeth and 4 slots. If the room where the saw is used is illuminated with a pulsed light source, at what pulse frequencies will a) the saw blade teeth appear to be stationary? b) The blade slots appear stationary? c) Will t..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd