Sketch the cycle on p-v coordinates

Assignment Help Mechanical Engineering
Reference no: EM13216636

Two kilograms of air within a piston-cylinder assembly execute a carnot power cycle with maximum and minimum temperatures of 750k and 300k, respectively. The heat transfer to the air during the isothermal expansion is 60kj. At the end of the isothermal expansion, the pressure is 600kPa and the volume is 0.4 m^3. Assuming the ideal gas model for air, determine:

A) thermal efficiency
b)the pressure and volume at the beginning of the isothermal expansion, in kPa and m^3, respectively.
C) the work and heat transfer for each of the four processes, in kj
d)sketch the cycle on p-V coordinates

 

Reference no: EM13216636

Questions Cloud

Determine the first three natural frequencies of the tube : (a) determine the first three natural frequencies of the tube (b) Draw the standing wave pattern for both pressure and velocity (c) repeat parts a and b if the right one end is attached to an orifice (Hint: consider the impedance of the orifice to..
What are the implacations of multiculturalism : What are the implacations of multiculturalism and what affect does this concept have on societies as technology advances and more countries become multicultural
How many engagement points on the flywheel would necessary : How many engagement points on the flywheel would be necessary to make this machine safe? Show your work.
A patient''s pain assessment and treatment : You worked for a number of years in the office of a family physician who has just retired. You have now taken a position on a busy surgical floor of a local, acute-care hospital.
Sketch the cycle on p-v coordinates : Two kilograms of air within a piston-cylinder assembly execute a carnot power cycle with maximum and minimum temperatures of 750k and 300k, respectively.
Compute the minimum possible radius of the specimen : A circular specimen of MgO is loaded using a three point bending mode. Compute the minimum possible radius of the specimen without fracture, given that the applied load is 5560N, the flexural strength is 165 MPa. and the separation between load po..
Explain why the ocean is studied as the world ocean : Explain why the ocean is studied as the World Ocean. Compare and contrast the five (5) main ocean basins of the World Ocean. Describe how differences in density of Basaltic rock (found in oceanic crust) and Granitic rock (found in continental crust) ..
State the company recently received several large contracts : The company recently received several large contracts and is anticipating an exponential growth in the storage requirements and the number of employees
Determine the exit temperature : Air at 90 kpa and -7 C enters an adiabatic diffuser steadily with a velocity of 180 m/s and leaves with a low velocity at a pressure of 100 kpa. The exit area of the diffuser is 5 times the inlet area. Determine (a) the exit temperature and (b) th..

Reviews

Write a Review

 

Mechanical Engineering Questions & Answers

  Determine be naturak frequency of the system

A 0,5Kg mass attached linear spring suffress 01 N/m. Determine be naturak frequency of the system in hortz e reapert this calculation for a mass of 50Kg and a suffress of 10N/m and compare your result to that of part.

  Define cooling/dehumidification of an air stream

Cooling/Dehumidification of an air stream, A 1000 m3/minute air stream at atmospheric pressure is at a temperature of 82.2oC and a humidity of 60%. We want to cool the air + water vapor to 8.9oC to condense the water vapor.

  Find the average power supplied by the engine

the 2 Mg car increases its speed uniformly from rest to 25 m/s in 30s up the inclined road. determine the maximum power that must be supplied by the engine, which operates with an efficiency of 0.8. also, find the average power supplied by the eng..

  Calculate the net heat flow and the overall change

The piston is then move in,and heat is rejected bt the air reversibly at constant pressure until the volume is the same as it was initially.Calculate the net heat flow and the overall change of entropy.sketch the process of p-V and T-s diagram.

  Explain the first law of thermodynamics

Explain the first law of thermodynamics using the conversion of a fuel (gasoline or diesel) in an internal combustion engine. Provide sufficient details (sentences and illustration) to explain the first law.

  Solve for the pressure of a gas using both equations

Solve for the pressure of a gas using both equations at a temperature of 400K and a molar volume of 1x 10-4 m3/mol. For the van der Waals EOS, use parameters of a= 4.1x10-1 (m3/mol)2 Pa, and b=4.3x10-5 m3/mol.

  Determine fourier number compare two identical steel spheres

Determine Fourier Number, Compare two identical steel spheres, except the first has a two inch diameter while the second sphere has a four inch diameter. The larger sphere will have a Fourier number approximately

  Design value for the molded friction material and steel disk

Design value for the molded friction material and steel disks to be used 0.06 and pressure max=1400kpa. Determine appropriate values for the disk inside dimmeter, the total number of disks and the actuating force?

  Compare to the actual performance

Get information about a car engine .drive the ideal performance using the appropriate cycle and compare to the actual performance.

  Determine the magnitudes of fa and fb

The total force Fa + Fb exerted on the shelter is in the direction parallel to the line L and it's magnitude is 400 lb. Graphically determine the magnitudes of Fa and Fb.

  Explain why the two measurements give different values

A similar measurement is made applying the force parallel to one of the cube axes. Explain why the two measurements give different values of the elastic modulus.

  Construct a suitable finite element model

Construct a suitable finite element model and compare the FEA predictions with the theoretical data and produce a graph to show the stress distribution

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd