Separate stream of air with mass flow rate

Assignment Help Mechanical Engineering
Reference no: EM13708888

Steam enters a counter flow heat exchanger operating at stead state at 0.07 MPa with a specific enthalpy of 2431.6 kJ/kg and exits at the same pressure as saturated liquid. The steam mass flow rate is 1.5 kh/min. A separate stream of air with mass flow rate of 100 kg/min enters at 30C and exits at 60C. The ideal gas model with cp=1.005 kJ/kg*K can be assumed for air. Kinetic and potential energy effects are negligible. Determine:

a) The quality of the entering steam

b) The rate of heat transfer between the heat exchanger and its surroundings in kW

Reference no: EM13708888

Questions Cloud

How has the internet affected price considerations : How has the Internet affected price considerations? Analyze several different industries, such as airlines, sales, hotel reservations, and book sales and
Pin-connected structure consists of a rigid beam : A pin-connected structure consists of a rigid beam ABCD and two supporting bars. Bar (1) is an aluminum alloy [E = 70 GPa] with a cross-sectional area of A1 = 2,400 mm2. Bar (2) is a bronze alloy [E = 100 GPa] with a cross-sectional area of A2 = 6,00..
Matrices and alpha and beta are scalar values : Write a MATLAB function called zgemm that computes the generalized matrix multiplication alphaAB + betaC using loops, where A, B, and C are matrices and alpha and beta are scalar values. The input order should be (alpha, A, B, beta, C).
Determine the volumetric flow rates at the inlet and exit : Refrigerant 22 enters an insulated compressor operating at steady state as saturated vap or at -16 C with a mass flow rate of 1.5 kg/s. Refrigerant exits at 7 bar, 70 C. Changes in KE and PE from inlet to exit can be ignored. Determine: (a) the volum..
Separate stream of air with mass flow rate : Steam enters a counter flow heat exchanger operating at stead state at 0.07 MPa with a specific enthalpy of 2431.6 kJ/kg and exits at the same pressure as saturated liquid. The steam mass flow rate is 1.5 kh/min. A separate stream of air with mass fl..
Compression ratio and inlet pressure to give maximum imep : Design an SI engine operating on an four-stroke air-standard cycle using stoichiometric gasoline is to have a maximum cylinder pressure of 11,000 kPa at WOT. Inlet pressure can be 100 kPa without supercharging, or it can be as high as 150 kPa with a ..
Single tape turing machine : Double and Two Tape Turing machines - single tape Turing machine
Determine the velocity of the water at the inlet and exit : A pump is employed to deliver liquid water from a pond to a higher elevation. The pump steadily draws water from the pond at a volumetric flow rate of 192 gal/min through a pipe having a 7 in diameter inlet. The exit diameter of the pipe is 2 in. and..
Fan mounted at the inlet of the electronic enclosure : The electronic components of a computer are cooled by air flowing through a fan mounted at the inlet of the electronic enclosure. At steady state, air enters at 18 C, 1 atm. For noise control, the velocity of the entering air cannot exceed 0.9 m/s.

Reviews

Write a Review

 

Mechanical Engineering Questions & Answers

  Why is it easier to exhale than to inhale in order to blow

why is it easier to exhale than to inhale in order to blow out a candle? how is it related to laminar flow or steady

  Its specific heat ratio is 14 and gas constant is 0287

an open brayton cycle engine operates with a compressor-pressure ratio of 6 an inlet temperature of 20 c and inlet

  A strain rosette with measurements in the direction of the

a strain rosette with measurements in the direction of the applied unidirectional force perpendicular and at 45 degrees

  Air at 80f and standard atmospheric pressure flows through

air at 80f and standard atmospheric pressure flows through a furnace filter with an average velocity of 2.4 fts. the

  A methanol fuelled turbocharged north american racing

a methanol fuelled turbocharged north american racing series engine has the following specificationfour strokeengine

  Determine the smallest allowable dimensions a and b of the

two blocks of rubber with a modulus of rigidity g 5 12 mpa are bonded to rigid supports and to a plate ab. knowing that

  A laboratory furnace wall is constructed of 020m thick

a laboratory furnace wall is constructed of 0.20m thick fireclay brick having k11.2 wm-degc. this is covered on the

  Consider a finite wing with an aspect ratio of 7 the

consider a finite wing with an aspect ratio of 7 the airfoil section of the wing is a symmetric airfoil with an

  Which is co-linear with the axis of shaft a all shafts are

an annular spur gear 1 mounted on shaft a has 120 teeth and drives a spur gear pinion 2 having 15 teeth mounted on

  The lowest temperature that has been achieved is about 1

the lowest temperature that has been achieved is about 1 times 10-6 k. to achieve this an additional stage of cooling

  Velocity of the bullet and block immediately after impact

A 25-g bullet is traveling with a velocity of 425 m/s when it impacts and becomes embedded in 2.5 kg wooden block. The block can move vertically without friction. Determine a) the velocity of the bullet and block immediately after impact,

  Determine the power required by the compressor and the rate

air with mass flow rate of 0.4 kgs enters an insulated compressor operating at steady state.determine the power

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd