Reference no: EM13713161
1. A reversible process has been defined as a process, which having taken place, can be reversed and in so doing leaves no change in either the system or the surroundings. Six restrictions were imposed
a. no friction
b. heat transfer occurs only for infinitesimal temperature differences
c. unrestrained expansion does not occur
d. no mixing
e. no turbulence
f. no combustion
Choose a process for which one of these restrictions is relaxed and discuss how this process is not reversible.
2. Thirty five (35) kilograms of chicken is to be frozen in a household freezer. The chicken is at 150C when it is placed in the freezer and reaches -200C (well below the freezing point) in 3 hours. If the COP of the freezer is 4.3 during this process, determine the required power input (in kW).
Hint: You will need to perform a first law analysis on the chicken to determine the QL for the refrigerator. Some properties of the chicken that will be useful:
Freezing point for the chicken: -2.8°C
cP for unfrozen chicken: 3.32 kJ/(kg?K)
cP for frozen chicken: 1.77 kJ/(kg?K)
energy that must be removed to freeze chicken: 247 kJ/kg
(also called the latent heat of fusion)
What is the mass flow rate of steam through the diffuser
: Steam at a pressure of 14.7psia and a temperature of 320deg F enters a diffuser inlet at a velocity of 500ft/s. The steam decelerates in the diffuser to a velocity of 100ft/s. The steam leaves the diffuser as saturated vapor at 240 deg F. The area of..
|
What is the final velocity of glider a.
: Two gliders move toward each other on a frictionless linear air track. Glider A has mass 0.50 kg. Glider B has mass 0.30 kg. What is the final velocity of glider A.
|
Experience fast fracture under an applied stress
: A structural steel with a fracture toughness of 60 MPa(m^1/2) has no surface crack larger than 3.5 mm in length. By how much (in %) would this largest surface crack have to grow before the system would experience fast fracture under an applied stress..
|
Discuss jit-just-in-time and lean production
: Discuss JIT-Just-in-Time and Lean Production - Discuss Collaborative Commerce and its benefits.
|
Reversible process has been defined as a process
: A reversible process has been defined as a process, which having taken place, can be reversed and in so doing leaves no change in either the system or the surroundings. Six restrictions were imposed
|
Find distance d the collision is elastic inelastic
: Block 1 of mass m1 slides from rest along a frictionless ramp from height h = 3 m and then collides with stationary block 2, which has mass m2 = 5m1. What is the value of distance d if the collision is Elastic inelastic.
|
Change in magnetic properties when steel is heated
: Describe the theory used for the IZOD test and what units are used to report toughness? Explain the change in magnetic properties when steel is heated. Is this due to allotropic properties?
|
Mixture of air and water at a temperature
: A mixture of air and water at a temperature of 30ºC and a pressure of 750 mmHg has a relative humidity of 75%. The wet gas is compressed to 40 psia and cooled to 20ºC. How many cubic meters of original gas were compressed if 0.75 lb of condensate (wa..
|
Stiletto heel has a semi-circular cross-section with radius
: A stiletto heel has a semi-circular cross-section with radius of 0.25 in. Due to walking over irregular surfaces and shifts in body weight, moments of up to 30 lb.-in. can act where the heel attaches to the shoe. Determine the maximum tensile or comp..
|