### Propeller thrust and power

Assignment Help Mechanical Engineering
##### Reference no: EM13712347

Propeller Thrust and Power

The exit velocity from the control volume of the propeller from problem 1) is 120 m/s. Use the flight velocity and operating altitude from problem 1)

a) Calculate the total net thrust generated by the propeller

b) Calculate the propeller power used to generate thrust.

c) The turbine driving the propeller generates 416 kW of power. Calculate the efficiency of the propeller.

d) Calculate the advance ratio of the propeller from problem 1).

e) What is the importance of the advance ratio for design and use of a propeller?

#### Determine the enthalpy of combustion

For a natural gas with a molar analysis of 40% pentane(C5H12), 35% methane (CH4), and 25% propane (C3H8), determine the enthalpy of combustion, in KJ/kmol of mixture, at 25

#### Assuming a vertical surface tension force

A steel needle of length L and radius r will ?oat in water if carefully placed. Write an equation that relates the various variables for a ?oating needle assuming a vertical

#### Calculate the mass flow rate through the two-stage turbine

Steam enters a two-stage adiabatic turbine at 8 MPa and 550ºC (State 1) and is expanded to 2 MPa (State 2) in the first stage of expansion. This steam is reheated at constant

#### What is the net radiant heat flux

Calculate the leaf temperature in the rural and urban locations - Obtain an expression for the total, hemispherical absorptivity, aS, of the plate to solar radiation incident

#### Complete a thermodynamic analysis of the system

Complete a thermodynamic analysis of the system using the approximation of constant specific heats. Determine T5, T6, T7, m·2, and Q·int (the internal heat transferred within

#### Develop a system of equations and solution

Depron is a polystyrene foam, popular as a material for the manufacture of fast food trays and packaging. It is much lighter than balsa wood and can be cut with a sharp blad

#### Determine the internal energy change for this process

A tank of CO2 has a volume of 0.15 m^3, contains 0.8 kg of CO2 at a pressure of 453.4 kPa. 10% percent of the mass is removed in such a way that the pressure falls to 371.8 kP

#### Determine a wrench equivalent force system

Determine a wrench equivalent force system and specify the x and y coordinates of the point where the wrench's line of action intersects the xy plane. Express your answers i

### Write a Review 