Pressure driven flow between stationary parallel plates

Assignment Help Mechanical Engineering

Reference no: EM13718970

Consider the pressure driven flow between stationary parallel plates separated by distance b. Coordinate y is measured from the bottom plate. The velocity field is given by u=U(y/b)[1-(y/b)]. Obtain an expression for the circulation about a closed contour of height h an length L. Evaluate when h=b/2 and when h=b. Show that the same result is obtained from the area integral of the Stokes Theorem.

Reference no: EM13718970

Questions Cloud

Determine the safety against the brittle fracture : An engineering member is to be made of 18-Ni maraging steel (vacuum melted). The member is a plate loaded in tension, and it may have a crack in one edge. The dimensions are width b=35 and t=5.0mm, and the crack may be as long as a=7.0 mm.

Use the approximation equation for contact stress : A gear set has a module of 5mm, a 20° pressure angle, and a 24-tooth case-iron spur pinion driving a 48-tooth case-iron gear. The pinion is to rotate at 50 rev/min. What horsepower input can be used with this gear set if the contact stress is limited..

Final equilibrium temperature and entropy generation : A container filled with 73 kg of liquid water at 99ºC is placed in a 60-m3 room that is initially at 12ºC and 1 atm. Thermal equilibrium is established after a while as a result of heat transfer between the water and the air in the room. Using consta..

Determine the final mass of the tank : An insulated rigid tank contains 5 kg of helium gas at 440 kPa and 31C. A valve is now opened, and helium is allowed to escape until the pressure inside drops to 200 kPa. Assuming the helium remaining inside the tank has undergone a reversible, adiab..

Pressure driven flow between stationary parallel plates : Consider the pressure driven flow between stationary parallel plates separated by distance b. Coordinate y is measured from the bottom plate. The velocity field is given by u=U(y/b)[1-(y/b)]. Obtain an expression for the circulation about a closed co..

Rigid tank is divided into two equal parts by a partition : An insulated, rigid tank is divided into two equal parts by a partition. Initially, one part contains 6.06 kmol of an ideal gas at 155 kPa and 30C, and the other side is evacuated. The partition is now removed, and the gas fills the entire tank. Dete..

Dual cycle has a compression ratio : A Dual cycle has a compression ratio of 15:1. The state at the beginning of compression is 14.4psi and 60F. The volume ratio during the constant pressure part of the heat addition process is 2:1. The pressure ratio during the constant volume heat add..

Basic bonding and atomic models : Explain the answer in a manner such that someone who did not previously know the answer will now understand the concept down to the microscopic level (i.e., basic bonding and atomic models).

Find the velocity at which the water jet hits the ball : The 0.15 kg ball is held stationary by a jet of water. At the nozzle, the speed of the jet is 6m/s, and its diameter is 12mm. Find the velocity at which the water jet hits the ball and the height of the ball. Density of water is 1000kg/m^3

User Account

All Pages