Piston-cylinder assembly-heat transfer during the process

Assignment Help Mechanical Engineering
Reference no: EM13709270

A closed, frictionless, piston-cylinder assembly contains 4 lbm of H20. Beginning with an initial volume of 10 ft^3, the H2O is compressed slowly until the volume has been reduced to 10 percent of the initial volume. During the process, heat transfer from the H2O occurs at such a rate as to keep the temperature constant at 300 degrees F. determine the magnitude and direction of the work and the heat transfer during the process.

Reference no: EM13709270

Questions Cloud

What percentage of incident light intensity is transmitted : A beam of light in air strikes a glass slab at normal incidence. The glass slab has an index of refraction of 1.50. what percentage of the incident light intensity is transmitted
Find the angle of refraction for the angle of incidence : A slab of glass with an index of refraction of 1.64 is submerged in a liquid with an index of refraction of 1.27. Light in the liquid is incident on the glass. Find the angle of refraction for the angle of incidence
What is the final temperature of the aluminum ball : A 500 g aluminum ball is removed from a pan of boiling water (at 100 oC) and placed in a thermos containing 100 g of ice which is at 0oC. What is the final temperature of the aluminum ball
What is the acceleration of the sphere : A point charge q1=15.00uC is held fixed in space. From a horizontal distance of 6.00 cm, What is the acceleration of the sphere
Piston-cylinder assembly-heat transfer during the process : A closed, frictionless, piston-cylinder assembly contains 4 lbm of H20. Beginning with an initial volume of 10 ft^3, the H2O is compressed slowly until the volume has been reduced to 10 percent of the initial volume. During the process, heat transfer..
Find which of the blackbodies emits more power : Suppose there are two blackbodies with the same size and shape. Which of the blackbodies emits more power through radiation? How much more power
What is the total elapsed time : A rock is dropped from a tree of height 29 m into a lake (depth 5.2 m) below. What is the total elapsed time
How much force does the astronaut exert on his chair : How much force does the astronaut exert on his chair while accelerating straight up at 18.0m/s2
The uncertainty in the dimensional measurement : A pneumatic displacement gage has d1=0.762 mm and d2=1.575 mm. The supply pressure is 68919.7 Pa with a random fluctuation of ±483 Pa, and the differential pressure Pd-Pa is measured with a water manometer that may be read with an uncertainty of 12.4..

Reviews

Write a Review

 

Mechanical Engineering Questions & Answers

  The tank then cools to the ambient temperature at which

air from a line at 12 mpa 15 deg c flows into a 500-liter rigid tank that initially contains air at 100 kpa and 15 deg

  At a surface cutting speed of 190 mmin the productive tool

at a surface cutting speed of 190 mmin the productive tool life was 60 minutes. at a surface cutting speed of 225 mmin

  The water discharges are 25 cfs to the left 5 cfs to the

for this wye fitting which lies in a horizontal plane the cross-sectional areas at sections 1 2 and 3 are 1 ft2 1 ft2

  If the refrigerant flow rate is cut to 50 kgs but it still

refrigerant 134a at 10 bars 38oc flows at 10.0 kgs through a heat exchanger leaving at 9.0 bars and 80oc. it exchanges

  R-134 enters the condenser of a window air conditioning

1. r-134 enters the condenser of a window air conditioning unit at 800 kpa and 35 c and leaves as a saturated

  Suppose that the mass in a mass-spring-dashpot system with

suppose that the mass in a mass-spring-dashpot system with m10 c9 and k2 is set in motion with x00 and x05 a find the

  Fifty five kj of heat is transferred to the air during this

two kg of air is contained in a piston-cylinder assembly. the initial volume is 0.01m3 and pressure is 10 bar. the air

  Determine the entropy generated and shows sgen varies

The brake of a vehicle can be modeled as a solid of mass m , with specific heat c and uniform temperature T , initially equal to the ambient temperature T0. During the braking process the brake receives work input W, temperature rises to T and heat t..

  A 1kg fluid is compressed reversibly according to a law

a 1kg fluid is compressed reversibly according to a law pv0.25 where p is in bar and v is in m3kg. the final volume is

  Determine the average normal stress in the shank

The long bolt passes through the 4 in. thick plate. If the force in the bolt shank is 50 lb, determine the average normal stress in the shank, the average shear stress along the cylindrical area of the late defined by the section lines a-a, and the a..

  When the heat transfer of 200 kw occurs from the turbine to

a steam turbine operates at steady state. steam enters the turbine at 2.0 mpa and 350 degc with a specific enthalpy of

  10 kg of water in a piston cylinder exists as a saturated

10 kg of water in a piston cylinder exists as a saturated mixture at 120 kpa with quality 40. the water is now heated

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd