Modelling the air as ideal gas with constant specific heats

Assignment Help Mechanical Engineering

Reference no: EM13707428

Air is contained in a piston-cylinder assembly, initially at 40 psia and 600 R. The air expands in a polytropic process with n = k = 1.4 until the volume is doubled. Modelling the air as an ideal gas with constant specific heats, determine:

1) The final temperature in R and pressure in psia, and

2) The work and heat transfer, each in BTU/lbm of air

Reference no: EM13707428

Questions Cloud

Impacts and ethical issues surrounding the subject : Research the history, examples, causes, impacts and ethical issues surrounding the subject. Be sure to understand the arguments being used by all parties. There may be more than 2 sides of the issue.

What forms do the equations of motion for idealized string : What forms do the equations of motion for an idealized string take if either (a) the linear density varies with position, or (b) the string hangs vertically supported only at the upper end?

A rigid tank with a volume : A rigid tank with a volume of 1.8 m3 contains 15 kg of saturated liquid-vapor mixture of water at 2 bar. Now the water is slowly heated. Determine the temperature at which the liquid in the tank is completely vaporized. Show the process on a T-v diag..

Develop your knowledge and skills in the areas : Develop your knowledge and skills in the areas - Modbury Triangle Shopping Centre v Anzil and roads and Traffic Authority v Dederer

Modelling the air as ideal gas with constant specific heats : Air is contained in a piston-cylinder assembly, initially at 40 psia and 600 R. The air expands in a polytropic process with n = k = 1.4 until the volume is doubled. Modelling the air as an ideal gas with constant specific heats,

Determine the final temperature and pressure : A piston-cylinder assembly contains CO2. The CO2 expands with PV1.5=constant where the initial state is 200 degrees F and 40 lbf/in^2, to a final state where the volume doubles. Determine the final temperature, pressure, work and heat transferred

Maximum normal stress theory-maximum shear theory : A torsion bar is used as a suspension element for a vehicle. The bar has a diameter of 20mm. It is subjected to a torsional moment of 450Nm and an axial tensile force of 36.0kN. Draw a stress element on the surface of the bar and then draw the Mohr's..

Geoffrey is building an electronic circuit on a breadboard : Geoffrey is building an electronic circuit on a breadboard. He needs to supply his circuit with a 1500 ohm resistance. But he does not have any 1500 ohm resistors on hand. All he has is a box of 1000 ohm resistors.

Determine the maximum shear stress at the point : The stresses at a point in plane stress on a sheet metal roof were found to be sigma_xx = 10 ksi (C), sigma_yy = 20 ksi (C) and Tau_xy = 30 ksi using matrix methods a) determine the normal and shear stresses on a plane passing through the point that ..

User Account

All Pages