Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Liquidated damages are intended to represent anticipated losses to the owner based upon circumstances existing at the time the contract was made. List at least five types of potential losses to the owner that would qualify for determination of such potential losses.
If the footings fails at a load of 82 kN, what is the failure load per unit area on the base of a square footing 2.0 m by 2.0 m loaded with its base at the same depth in the same materials
A vertical curve is designed for 55 mi/h and has aninitial grade of +2.5% and a final grade of 1.0%. The PVT is at station 114 + 50. It is known that a point onthe curve at station 112 + 35 is at elevation 245 ft.
A paper plant is proposed for a location 1 km upwind from a town. It will emit 40 g/s of hydrogen sulfide, which has an odor threshold of about 0.1 mg/m 3. Winds at the effective stack are typically 4 m/s blowing toward the town.
A tensile load of 50 000 lb is applied to a metal bar with a 0.6x0.6 in cross section and a gage length of 2 in. Under this load the bar elastically deforms so that the gae length increases to 2.007 in
The 480-lb V-8 engine is supported on an engine stand and rotated 90 degrees from its upright position so that its center of gravity G is in the position shown. Determine the vertical reaction at each roller of the stand. Neglect the weight of the..
A 3000-lb car is traveling on a paved road with Cd (coefficient of drag) = 0.35, Af (frontal area of the vehicle) = 21ft^2, and p(air density)=0.002378 slugs/ft^3. Its engine is running at 3000rpm and is producing 250ft-lb of torque.
Water is at 9000 kPa and 300 degrees celcius and flows through a partially open valve. Pressure immediately after the valve is measured to be 600 kPa. Calculate the specific internal energy of the water leaving the valve
Torque is transferred through two shafts by means of gears. If the diameters of gears B and C are in the ratio 1:2, what should the ratio of shaft diameters be so that both shafts have the same shear stress
An ogee spillway of a gravity dam is to be modeled using water. The spillway section is 40 feet high, its crest length is 60 feet and the maximum discharge is 3,000 CFS when the head on the crest of the spillway is 5 feet. Using a model scale of 1:10..
If clean groundwater flows through an aquifer contaminated with a dense non- aqueous phase liquid (DNAPL), calculate the concentration of DNAPL in the water as a function of time if the DNAPL is dissolving into the water at a rate of k1
Let X be a random variable defined by the density function f(x) = 3X^2 0
If the bar is 90 degrees F. If the bar is cooled to 40 degrees F, what is the maximum normal stress in the bar and what is the maximum shear stress alpha = 13*10^-6 /degF, E = 10*10^3 ksi
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd