Is it possible to accelerate a fluid to supersonic velocity

Assignment Help Civil Engineering
Reference no: EM131036186

Is it possible to accelerate a fluid to supersonic velocities with a velocity other than the sonic velocity at the throat? Explain.

Reference no: EM131036186

Questions Cloud

Total annual costs of holding and ordering : a. What is the EOQ? b. Wat are the total annual costs of holding and ordering c. How many orders should D-M place with Specialty Lighting per year?
Determine the back pressure that will result in an exit mach : Air enters a converging-diverging nozzle at 0.5 MPa with a negligible velocity.
Injection molding department of a company : The injection molding department of a company uses an average of 30 gallons of special lubricant a day. The supply of the lubricant is replenished when the amount on hand is 170 gallons.
What do the states on the fan no line and the rayleigh line : What do the intersection points of these two curves represent?
Is it possible to accelerate a fluid to supersonic velocity : Is it possible to accelerate a fluid to supersonic velocities with a velocity other than the sonic velocity at the throat?
Problem regarding the optimal order quanitity? : A mail-order house uses 16,880 boxes a year. Carrying costs are 60 cents per box a year, and ordering costs are $96. The following price schedule applies.
Why the maximum flow rate per unit area for a given gas : Explain why the maximum flow rate per unit area for a given gas depends only on P0/ 0.For an ideal gas with k = 1.4 and R = 0.287 kJ/kg · K, find the constant a such that m . /A* = aP0/0.
Calculate the pressure temperature velocity mass : Calculate the pressure, temperature, velocity, and mass flow rate in the test section for a Mach number Ma= 2. Explain why the air must be very dry for this application.
Calculate and plot the exit pressure : calculate and plot the exit pressure, the exit velocity, and the mass flow rate versus the back pressure Pb for 0.9 ≥ Pb ≥ 0.1 MPa.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the velocity of the steam at the nozzle outlet

Helium enters an adiabatic steady-state nozzle at 200kPa and 124 degrees Celsius and 10m/s. At the nozzle exit the temperature of the helium is 100 degrees Celsius and the pressure = 150 kPa.

  Determine to what depth will the balloon sink

A 2.0-ft^3 object weighing 650 lb is attached to a balloon of negligible weight and released in the ocean (γ = 64 lb/ft^3). The balloon was originally inflated with 5.0 lb of air to a pressure of 20 psi.

  Find the maximum columm load for asd dead-live-roof load

A 4x4 carries an axial compressive force caused by dead, love, and roof live loads. Lumber is No. 1 Douglas Fir-Larch. Cm = 1.0 , Ct = 1.0, Ci = 1.0. The unbraced length of the member is 12 ft.

  Determine level of service at which the highway will operate

A 3-mi section of a two-lane, two-way highway located in a mountainous terrain is to be designed to carry a peak hour volume of 750 vehicles. Using the operational level of analysis

  Footings for a structure are to be built beneath a basement

Footings for a structure are to be built beneath a basement slab

  Determine the makeup of the mixture on a mass

determine the makeup of the mixture on a mass basis and the internal energy change per unit mass of mixture.

  What is the diameter d of the smallest-sized particles

In a hydrometer test, the data recorded at 60 minutes after the start of the test are as follows: Gs = 2.6, temperature of water T = 24°C and L = 9.2 cm. What is the diameter D of the smallest-sized particles

  Calculate vapor pressure-air pressure and relative humidity

Calculate the vapor pressure, air pressure, relative humidity, and air density at elevation 1500 m if air temperature is 25 degrees C and dew point temperature is 20 degrees C and the lapse rate is 9 degrees C/km

  Determine the minimum thickness of the welds

The tank has an inside diamater of 100 cm and will be subjected to a maximum internal pressure of 820 kPa. The allowable tensile stress in the wall is 83 MPa, and the allowable tensile stress in the weld is 55 MPa.

  How long would take layer to reach 30percent consolidation

how long would it take a layer of this clay 5m thick to reach the same degree of consolidation under the same stress and drainage conditions. how long would it take the layer to reach 30% consolidation.

  Determine what is the rate of flow into the reservoir

Runoff from a storm flows into a reservoir with a surface area of 20.0 ha at a constant rate. The reservoir level is observed to rise at 1 mm per minute when water is being released through the dam at a rate of 10 m3 per second.

  What is the maximum length of trench that can excavated by

What is the maximum length of trench that can excavated by hand economically rather than by a trenching machine. it cost 900.00 to transport a trenching machine to the job and back to the storage yard. the trenching machine can excavate 265 linear fe..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd