Identify the minimum and maximum deflection and rope tension

Assignment Help Civil Engineering
Reference no: EM13303543

The combined weight of the tightrope walker and balancing pole is 1000-N. Friction of the walker's shoes and rope are sufficient to cause the rope to have more tension on one side then the other. Neglecting the weight and any elastic deformations of the 20.1-m long rope, create a table using 1.0m increment for the range of x from 1.0-m to 10.0-m as follows:

Postion x Deflection Y Tension in rope segment AC Tension in rope Segment BC

Identify the minimum and maximum deflection and rope tension.

Reference no: EM13303543

Questions Cloud

Brief description of the nossal institute for global health : Give a brief description of the Nossal Institute for Global Health (Nossal) and outline how climate change is likely to affect Nossal's business operations in developing countries.
Calculate the speed at impact to a driver at a distance : A large rock became visible to a driver at a distance of 175 ft. Assuming a perception-reaction time of 0.8 s, an initial speed of 42 mi/h, a coefficient of friction of 0.5, and a level roadway, calculate the speed at impact.
Calculate the magnitude of the change in the balls momentum : A 243-g ball falls vertically downward, hitting the floor with a speed of 2.48 m/s, Calculate the magnitude of the change in the ball's momentum
Summary on sensing vehicle dynamics : I need summary Sensing Vehicle Dynamics for Determining Driver Phone Use. Defining Robustness to Real-Road Driving Environments.
Identify the minimum and maximum deflection and rope tension : Friction of the walker's shoes and rope are sufficient to cause the rope to have more tension on one side then the other. Neglecting the weight and any elastic deformations of the 20.1-m long rope, create a table using 1.0m increment for the range
How many shares will luther have outstanding : After the repurchase, how many shares will Luther have outstanding?
What will net increase or decrease in the annual flotation : The amortization of flotation costs reduces taxes, and thus provides an annual cash flow. What will the net increase or decrease in the annual flotation cost tax savings be if refunding takes place?
What is the equilibrium concentration of elemental mercury : Biota can uptake and bioconcentrate compounds through vapor phase absorption. For example, leaves exposed to elemental mercury vapors will absorb the mercury into the aqueous phase and the lipid phases of the leaves. Kow for mercury = 4.17.
Describe the value chain of the gap inc main products : Describe the factors that impact the supply of the GAP Inc main products/services.Describe the value chain of the GAP Inc main products/services.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the discharge in each pipe and the pressure

Two reservoirs are connected with a 30" diameter pipe with a length of 19,680 ft. The water surface elevation in the upper reservoir of the upper reservoir is 984 ft, lower reservoir 886 ft and the elevation at the midpoint is 918 ft.

  Mass of water vapor diffuses through tube

If the water vapor is removed from the upper tank so that the concentration there remains nearly zero, what mass of water vapor diffuses through the tube each hour?

  Determining maximum acceleration and maximum velocity

The posItIon of a particle along a straight line is given by s = (t 3 - 9t 2 + 1St) ft, where t is in seconds. Determine its maximum acceleration and maximum velocity during the time interval 0 :5: t :5: 10 s.

  What surface area in square meters must she cover

A worker is to paint the walls of a square room 8ft high and 12 ft along each side. what surface area in square meters must she cover?

  Determine the total resultant force

in inclined circular gate with water on one side shown in the figure. determine the total resultant force acting on the gate and the total location of center pressure.

  Water system design

Determine the corresponding error in the computed discharge

  Calculate uniform load

Calculate uniform load (in addition to self wt.) which will cause the section to begin cracking

  Calculate the speed at impact on a large rock

A large rock became visible to a driver at a distance of 175 ft. Assuming a perception-reaction time of 0.8s, an initial speed of 42 mph, a coefficient of friction equal to 0.5, and a level roadway, calculate the speed at impact.

  Find residual chemical concentration and amount of chemical

A chemical is added at the beginning of a water treatment plant at a dose of 750 lb/day. The water treatment plant provides water to a community of 200,000 people and the average water consumption in the city is 110 gallons per capita per day (gpc..

  Define deflection of a beam

Deflection of a Beam, If a beam of lenght L is fixed at the ends and loaded in the centre of the beam by a point load of F newtons the deflection

  Determine the percentages of gravel-sand-silt and clay

The particle-size characteristics of a soil are given in this table. Draw the particle-size distribution curve. X-axis is Particle Size and Y-axis is Percent Finer Particle Size (mm): 0.425, 0.033, 0.018, 0.01, 0.0062, 0.0035, 0.0018, 0.001.

  What are the speed and acceleration of the disks top

disk of radius R=7 in. spins at a constant angular speed of w=500rpm in the clockwise direction. If the disk is released from rest far above the ground, what are the speed and acceleration of the disk's top C point after it has fallen h=3ft

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd