User Account

All Pages

Hydraulic fluid

Assignment Help Mechanical Engineering
Reference no: EM13994065

Hydraulic fluid ( density= 840 kg/m3) passes through a knife-edged orifice, characterized by

Cd = 0.6 at a volumetric flow rate of 2 liters per minute. If the pressure drop across the orifice is 2 kPa.what is the cross sectional area of the orifice?

 

Reference no: EM13994065

Questions Cloud

Theoretical inertial pressure likely cause failure : Consider a garden hose that is 30 m long and 2 cm in diameter. The hose initially passes water ( Density = 1000 kg/m3) at a rate of 15 liters per minute. If the flow rate decreases linearly by 150 lit/s2, what is the inertial pressure generated in th..
Should citizens produce anticipate taking out a loan during : Prepare a monthly cash budget for Citizens Produce Co-op for the quarter ended September 30. Accounting Connection. Should Citizens Produce anticipate taking out a loan during the quarter? If so, how much should it borrow, and when?
What extra cost does the hospital incur-cycle-service level : Wood County Hospital consumes 1,000 boxes of bandages per week. The price of bandages is $35 per box, and the hospital operates 52 weeks per year. The cost of processing an order is $15 and the cost of holding one box for a year is 15 percent of the ..
Why might otc derivatives be considered more risky : Why might OTC derivatives be considered more risky than exchange-traded derivatives?
Hydraulic fluid : Hydraulic fluid ( density= 840 kg/m3) passes through a knife-edged orifice, characterized by Cd = 0.6 at a volumetric flow rate of 2 liters per minute. If the pressure drop across the orifice is 2 kPa.what is the cross sectional area of the orifice?
Uses a continuous review inventory control system : Petromax Enterprises uses a continuous review inventory control system for one of Its SKUs. The following information is available on the item. The firm operates 50 weeks in a year. What is the economic order quantity for this item?
Specify independent and potentially confounding variables : For each item below, specify the independent, dependent, and potentially confounding variables. Eighty rats were weighed and then randomly assigned into four groups. Each group of rats is fed identical diets except for the amount of Calcium they rece..
Explain how this might encourage front running by traders : In 2001, the NYSE switched from a fractional pricing system (stock priced in increments of 1/8 of a dollar) to a decimal pricing system (stock priced in increments as small as 1 cent). Explain how this might encourage front-running by traders?
Water, sae 30 motor oil, and honey flow : Water, SAE 30 motor oil, and honey flow through three 25 cm diameter pipes. Each pipe passes a volumetric flow rate of Q = 0,01 m3/s. Assume the densi- ties of these fluids are water = 1, 000 kg/m3, oil ; 850 kg/m3, and honey = 1,300 kg/m3, and the v..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Evaluating exergy at 85 cents per kwh determine the annual

water vapor enters a valve with a mass flow rate of 2 kgs at a temperature of 320 degrees celsius and a pressure of 60

  Word paper on a specific web or mobile application

Describe a specific web or mobile application's purpose. How is it used? What changes has it brought about to its users? What are some likely future uses and enhancements?

  Find reciprocating mass and relative angular position

Find the reciprocating mass and the relative angular position for each of the inner cranks, if the length of each crank is 350 mm, the length of each connecting rod 1.7 m and the engine speed is 500 rpm.

  The value of the uniform wall temperature is equal to that

air flows in a round pipe at a rate of 0.015 lbmsec. the air enters the pipe at a temperature 76.8 of and a pressure

  Show all three states of steam on t-v diagram label states

steam enters an adiabatic turbine at 20 mpa and 600?c state 1. at an intermediate stage 20 of the inlet steam is bled

  How would you calculate the sensible heat, the latent heat

How would you calculate the sensible heat, the latent heat, and determine the latent heat of vaporization of the water vapor in this air stream as the air is cooled from 170 F to 48 F?

  Saturated mixture of water at 1500kpa is throttled to

image text transcribed for accessibility a compressor compresses helium from 100kpa and 20 degree c to 400kpa and 100

  Calculate the inside temperature when the outer surface is

the inside dimensions of a refrigerated box is 2m x 1 m x 1.2 m. it is covered with insulation 50 mm thick and then a

  Suppose that the us military is considering a new lifetime

1 current airbag regulations specify that they must only pass a test designed to protect a 175 pound male who is not

  How much heat is added to accomplish

A copper vessel of mass 2kg contains 6kg of water. If the initial temperature of the vessel plus water is 20C and the final temperature is 90C, how much heat is added to accomplish this change assuming that there is no heat loss?

  Calculate uncertainty in mass of filled yogurt containers

In a yogurt-filling line the containers are filled with 1 kg of yogurt. The mass of the yogurt is measured while the filling nozzle is open. The nozzle flow rate is 0.20 Kg/sec. Several factors affect the flow rate, including the density and the visc..

  Suppose we want to cool a sample of n2 gas at room

for n2 gas cpm is nearly constant at 3.5r 29.1 jmol k for temperatures in the range 100 to 400 k and for low or

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd