How would you structure a portion of an aviation safety

Assignment Help Civil Engineering
Reference no: EM13563717

1.How would you structure a portion of an Aviation Safety program for a commercial airline or government agency. Briefly describe one or two safety problems and why it is a serious safety problem.

2.A section of a road has a superelevation of .6% and a curve of 600ft radius. What speed limit will you recommend at this section of the highway?

3.Find the limiting length of an offset so that the displacement of a point on paper is may not exceed 0.025 centimetres.The offset was laid 3 degree out from it's true direction and the scale was 10m to 1cm.

Reference no: EM13563717

Questions Cloud

Evaluate what is the mass of the second car : A 9500 kg boxcar traveling at 16 m/s strikes a second car. The two stick together and move off with a speed of 6.0 m/s. What is the mass of the second car
Determine the additional force that will be required : A two-axle truck being driven on a flat and straight section of a highway at a speed of 65 mph reaches a curved section of the highway with a grade of 5% and a radius of 1,500ft.
What is the maximum so2 discharge rate : An electric utility wants to build a new coal fired power plant in an urban setting. The regulatory agency has determined that in order for the plant to be permitted it must limit its emissions to prevent the ground level SO2 concentration from excee..
What is the maximum height of the balloon : A 1.50 kg water balloon is shot straight up with an initialspeed of 5.00 m/s. What is the maximum height of the balloon
How would you structure a portion of an aviation safety : Find the limiting length of an offset so that the displacement of a point on paper is may not exceed 0.025 centimetres.The offset was laid 3 degree out from it's true direction and the scale was 10m to 1cm.
Evaluate how much work did her force do on the car : In1960 a Tampa, Florida, mother reportedly raised one end of a carthat had fallen onto her son when jack failed. how much work did her force do on the car
Evaluate how much work does the force do on the block : A floating ice block is pushed through a displacement vector d= (15 m)i - (12 m)j along a straight embankment by rushing water, How much work does the force do on the block during the displacement
What is the work done on the man by the gravitational force : A 87.0-kg man is riding an escalator in a shopping mall. What is the work done on the man by the gravitational force
How long did it take for the rocket to reach that maximum : A single stage rocket is fired from a launch pad just in front of the Library. The rocket engines impart a constant acceleration of 20 m/sec/sec for a total time of 40 sec. At that time, there is no more fuel in the rocket engine and the rocket conti..

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Determine what is the specific yield of the aquifer material

The area is about 100,000 ha, the ground water pumping about 500 million m3 per year, and the water table drop about 3 m per year. Assuming no replenishment, what is the specific yield of the aquifer material

  Should aerotron electronics buy the water filtration system

a.  What is this investment's external rate of return b.  What is the decision rule for judging the attractiveness of investments based on external rate of return c.  Should Aerotron Electronics buy the water filtration system

  Chlorination tank for killing microorganisms

You are to design a chlorination tank for killing microorganisms in the effluent from a wastewater treatment plant. It is necessary to remove 99% of active bacteria in a wastewater flow of 120 m 3 /hr.

  Design a shore river intake system in a cold climate

Provide the minimum number of ports. The design conditions are: Winter design fl ow rate  4,300 m 3 /d Minimum river elevation held constant by lock and dam system  99.0 m 500-year fl ood elevation  113.3 m River bottom elevation  90.4 m

  Determine the governing load combination for both moments

A beam that is part of a rigid frame has end moments and mid-span moments for dead, live, and earthquake loads. Determine the governing load combination for both negative and positive moments at the ends and mid-span of the beam.

  Determine the flow rate of the oil

Oil of a specific gravity of 0.75 is flowing through a 6-in pipe under a pressure of 15 psi. If the total energy relative to the datumplate is 8.0 ft below the center of the pipe is 58.6 ft, determine the flow rate of the oil.

  What is the angular velocity of the pendulum immediately

A pendulum consists of a slender rod, AB, of weight Wr= 8.60 lb and a wooden sphere of weight Ws= 21.7 lb .(Figure 1) The length of the rod is d = 7.70 ft and the radius of the sphere is R = 0.500 ft

  Determine what will be the discharge q at a depth

If sewage (assume the properties are the same as those of water) flows at a depth of 1.5ft in the pipe, what will be the discharge Q = 10.6 cubic feet/second

  Explain why the atomic packing factor of fcc steel is less

If the radius of the interstitial sites( i.e. the radius of SPACE available rather than the radius of the atom that is placed in that space) in an FCC structure are determined according to 2r_interstital + 2r_Fe= a, explain why the atomic packing fac..

  How many loom operators should be employed to minimize cost

A room has 10 cotton spinning looms. Once the looms are set up, they run automatically. The setup time is exponentially distributed, with mean 10 minutes. The machines run for an average of 40 minutes, also exponentially distributed.

  Estimate the so2 concentration at midnight

Consider a box model for an air shed over a city that is 1 X 105 m on a side, with a height of 1200 m induced by a temperature inversion. Winds with no SO2 blow at 4 m/s agains one side of the box. SO2 is emitted in the box at the rate of 20 kg/s.

  Calculate the size of an anaerobic digester required

Calculate the size of an anaerobic digester required to treat the sludge from a primary clarifier designed to treat 38,000 m3/d of sewage. The quantity of dry volatile solids removed by the plant is 0.15 kg dry solids/m3 sewage. The sludge contains 9..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd