How we calculate the ultimate moment

Assignment Help Civil Engineering
Reference no: EM13536720

How we calculate the ultimate moment ( Mu) for the column design in case of a two storied school building framed structure. Only given data is loads coming from various slabs , beams around the column.

Only tell the steps how to procceed.

(This ultimate moment may be generated in case of axial load-Uniaxial bending condition or axial load-biaxial bending condition.)

(This is the problem of column design, so nothing is given except loading condition.)

Reference no: EM13536720

Questions Cloud

Calculate the settling velocity of a spherical particle : Use Stoke’s Law to calculate the settling velocity (m/s) of a spherical particle with a diameter of 1.0 mm and a density of 3 g/mL in water at a temperature of 30?C. The dynamic viscosity of water at 30?C is 0.798 x 10-3 N s/m2. The density of water ..
Compute the flows with return periods of 1 5 and 15 years : The table below provides the flows for the Llano River in Texas for the period of 1951 to 1970. Using the simplified frequency analysis method show in class (Weibul method)
What the average power usage of the average american : The U.S. accounts for just about one-quarter of all of the energy used by people on earth, and has some 300 million people. What’s the average power usage of the average American?
Calculate the concentration of methanol in the exit gases : You have a stream of air containing methanol at 5% by volume. The stream is flowing at 2000 actual ft^3/min at 1 atm pressure and 110 F. The regulations require94% removal of the methanol, and you decide to try a water absorption column, using pure w..
How we calculate the ultimate moment : How we calculate the ultimate moment ( Mu) for the column design in case of a two storied school building framed structure. Only given data is loads coming from various slabs , beams around the column.
Calculate the energy needed to bring the soil : We are digging a hole to build a building. Calculate the energy needed to bring the soil to surface level. Remember the sides of the excavation lie at 45 degrees. Else, the whole would be constantly refilling itself.
Define a structure to store roll no : Define a structure to store roll no, name and marks of a student. Using the structure of above write a ‘C’ program to create a file “student.dat”. There must be one record for every student in the file. Accept the data from the user.
Any current events that might affect your analysis : The draft report will be graded based on completeness, accuracy, quality of critical thinking, and analysis. The report length should approximate 10-15 pages, including the selected firm’s financial statements.
Prepare journal entries to record selected july transaction : Prepare journal entries to record the selected July transactions. Also prepare any footnotes to the July 31 financial statements that result from these transactions

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  What is the pressure inside the glass

A glass is cleaned in 45 0C hot water and placed onthe table bottom up. The room air at 20 0C thatwas trapped in the glass gets heated up to 40 0C andsome of it leaks out so the net resulting pressure inside is 2 kPaabove ambient pressure of 101 kPa...

  Compute atomic packing factor for diamond cubic crystal

Assume that bonding atoms touch one another, that the angle between adjacent bonds is 109.5, and that each atom internal to the unit cell is positioned a/4 of the distance away from the two nearest cell faces.

  Determine maximum value of z if flow is to remain laminar

The slope of the hill is such that for each mile (5280 ft) of horizontal distance, the change in elevation is Δz. Determine the maximum value of Δz if the flow is to remain laminar and the pressure all along the pipe is constant.

  The development of complex algorithms that can mine mounds

The development of complex algorithms that can mine mounds of data that have been collected from people and digital devices have led to the adoption of data mining by most businesses as a means of understanding their customers better than before

  How fast will the car be traveling when it reaches the tree

a car is traveling at sea level at 78 mi/h on a 4% upgrade before the driver sees a fallen tree in the roadway 150 feet away. the coefficient of road adhesion is 0.8. The car weighs 2700 lbs, has a drag coefficiant of 0.35, a frontal area of 18 ft..

  Find hp per foot of cutting edge ratio for all 4-conditions

The Caterpillar D6R Series 3 and D8R tractors are rated, respectively, at flywheel horsepowers (fwhp) 0f 185 and 305. The "A," "S," and "SU" blade widths (length) for the D6R are S, 16 ft, 9 in.; A, 17 ft, 1 in

  What is the maximum price per ton the company should par

The suppliers says it would prefer to sell the company a 65% NaOH solution and the company says the water content is immaterial as long as the equivalent costs are the same including freight.

  Determine the concentration of carbon in this alloy

The microstructure of an iron-carbon alloy consistsof proeutectoid ferrite and pearlite; the mass fractions of thesetwo microconstituents are 0.174 and 0.826, respectively. Determinethe concentration of carbon in this alloy.

  Find the rate of discharge of water at 60 degrees fahreneit

The 24-in pipe leads from a reservoir (flush entrance), and the 18-in pipe discharges into the air at a point 15 ft lower than the reservoir water surface level. Assuming all changes in section to be abrupt

  What torque is the engine producing at the vehicle speed

A 3400-lb car is traveling in third gear (ratio 2.5 to 1) on a level road at its top speed of 130 mi/h. The air density is 0.00206 slugs/cuft. The car has frontal area of 19.8 sqft, a drag coefficient of 0.28, a wheel radius of 12.6 inches, a driv..

  What should be the cross-sectional area of the circular rod

An engineer has to design a rod made with the same steel to carry a load of 150 kips without yielding. He desires to have a factor of safety against yielding of 1.5. What should be the cross-sectional area of the circular rod

  What is the greatest bending moment and where is it located

A cantilever beam of length 50 ft is embedded in a wall at A and has a free end B. A concentrated load of 100 kips upward is located at x = 25 ft from A. A uniformly distributed load of 20 kips/ft downward extends from 25 to 50 ft.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd