How to select the pit from which the soil should be bought

Assignment Help Civil Engineering
Reference no: EM13324194

A proposed embankment fill requires 8000 cubic meters of compacted soil. The void ratio of the compacted fill is specified as 0.7. Four borrow pits are available along with each of the respective void ratios along with the cost per cubic meter for moving the soil to the proposed construction site. Make necessary calculations to select the pit from which the soil should be bought to minimize the cost. Assume Specific gravity of soils to be the same in all pits.

Pit A: e = 0.82, cost ($/m^3) = 8
Pit B: e = 1.1, cost ($/m^3) = 5
Pit C: e = 0.9, cost ($/m^3) = 9
Pit D: e = 0.78, cost ($/m^3) = 12

Reference no: EM13324194

Questions Cloud

Explain a solution is made by mixing cuso4 : Consider the following equilibrium: Cu2+ + 4NH3 Cu(NH3)42+ (Kf = 4.8e+12) A solution is made by mixing 10.0 mL of 0.90 M CuSO4 and 1.50 L of 0.490 M NH3
Find principle stresses, max shear stress at a cross section : find principle stresses, max shear stress at a cross section 2 ft from the left of each locations: a) neutral axis, b) 2in. above neutral axis, c) the top of the beam.
What is the firms income tax liability : What is the firm's income tax liability and its after-tax income and what are the firm's marginal and average tax rates on taxable income?
Define what is the solubility of mx3 : What is the solubility of MX3. MX3 M3+ + 3X1- (Ksp = 2.00e-09) a) in water solubility = M b) in 0.11 M KX solubility = M c) in 0.16 M M(NO3)3 solubility = M
How to select the pit from which the soil should be bought : The void ratio of the compacted fill is specified as 0.7. Four borrow pits are available along with each of the respective void ratios along with the cost per cubic meter for moving the soil to the proposed construction site.
What is the magnitude of his displacement : A delivery man travels 34.0 m north, 23.0 m east, 12.0 m south, then takes an elevator 32.0 m up into a building. What is the magnitude of his displacement
Dilemmas in health care : Dilemmas in Health Care
What is the diameter of the star : You are on an unknown planet orbiting an unknown star. When the 108 cm long camera is pointed at the star an image is formed that is 1 cm in diameter, what is the diameter of the star
What is the bonds after-tax yield : Corporate bonds issued by Johnson Healthcare currently yield 8 percent- If an investor is in the 34 percent tax bracket, what is the bond's after-tax yield?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Develop the relation between bulk unit weight

develop the relation between bulk unit weight, specific gravity, void ratio and weight of water.

  Find the limiting length of an offset of a point on paper

Find the limiting length of an offset so that the displacement of a point on paper is may not exceed 0.025 centimetres.The offset was laid 3 degree out from it's true direction and the scale was 10m to 1cm.

  Runoff rate into the inlet grate

If the detention storage on the paved section is increasing at the rate of 60 m3/hr, what is the runoff rate into the inlet grate?

  What measurements should be laid out to establish a distance

a tape is calibrated and found to measure 100.04ft between the 0- and 100-ft marks. what measurements should be laid out to establish a horizontal distance of 682.25ft

  Determine the temperature t and the specific volume

A turbine expands to a pressure of 10 kPa and a quality of 0.94. Determine the temperature T and the specific volume at this state.

  Is the flow from point a to point b or vice versa and why

At Point A in a pipeline carrying water (? = 62.4 lb/ft3) the diameter is 3.0 ft, the pressure is 11 psi, and the velocity 4 ft/s. At Point B, 6 ft higher than Point A, the diameter is 2.5 ft and the pressure is 4 psi

  Find the length of the studs in a rake wall with base height

Find the length of the studs in a rake wall with a 5:12 pitch, a half span of 9'4", 16" OC and a base height of 7'3".

  Design a curve for the highway by computing the radius

The PI is at station 250+50, the design speed is 65mi/h, and a maximum superelevation of 0.07 ft/ft is to be used. If the central angle of the curve is 38 degrees, design a curve for the highway by computing the radius and stationing of PC and PT.

  How to find the velocity of the blade of the stick

Assume that 200 g is the equivalent mass of the stick concentrated in the blade which contacts the puck. The coefficient of restitution of between puck and blade is 0.6. Find the velocity of the blade of the stick

  Write matlab statement to evaluate tan write out error msgs

Assume that (t) is givenin degrees, and write the matlab statement to evaluate tan (t) aslong as the magnitude of cos(t) is greater then or equal to(10^-20). If the magnitude of cos(t) less then (10^-10,

  Determine the pressure at stagnation point on the nose

determine the pressure at stagnation point on the nose of the airplane. also determine the manometer reading h for the manometer attached to the static pressure tap within the test section of the wind tunnel if the air velocity

  Find the water content-void ratio and porosity

When it is dried out in an oven, it weighs 122.7 g. The specific gravity of solids is found to be 2.66. Find the water content, void ratio, porosity, degree of saturation, and wet and dry unit weights.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd