How to compute the final lengths and azimuths of lines

Assignment Help Civil Engineering
Reference no: EM13298307

The data in the tabulated chart applies to a closed link traverse. Find preliminary azimuths, adjust, and calculate departures and latitudes, misclosures in departures and latitude, and traverse relative precision. Balance the departures and latitude using the compass rule, and calculate coordinates of points B, C, and D. Compute the final lengths and azimuths of lines AB, BC, CD, and DE.

Measured Angle (right)

(A)258deg12min18sec

(B)215deg02min53sec

(C)128deg19min11sec

(D)237deg34min05sec

 

Adusted Az

Above (A)342deg09'28"

Below (D)101deg18min31sec

 

Measured Length (ft)

below (A) 200.55

below (B)253.84

below(C)205.89

 

(X)ft

(A)2,521,005.86

(D)2,521,575.16

 

(Y)ft

(A)379,490.84

(D)379,714,76

Reference no: EM13298307

Questions Cloud

What is the level of service on a km long percent upgrade : A rural freeway has an ideal free-flow speed of 120 km/h and two 3.6 m lanes in each direction, with right shoulder lateral clearance of 1.2 m. Interchanges are spaced approximately 5 km apart. Traffic consists of 10 percent trucks and buses and 8..
What is the terminal, or horizon value of operation : What is the terminal, or horizon, value of operation? (hint: find the value of all free cash flows beyond year 2 discounted back to year 2)
Find the speed of the water leaving the end of the hose : Water flowing through a garden hose of diameter 2.73 cm fills a 21.0-L bucket in 1.60 min. find the speed of the water leaving the end of the hose
What is its intrinsic mva : A company has capital of $200 million. It has an EROIC of 9%, forecasted constant growth of 5%, and a WACC of 10%. What is its value of operations? What is its intrinsic MVA?
How to compute the final lengths and azimuths of lines : calculate departures and latitudes, misclosures in departures and latitude, and traverse relative precision. Balance the departures and latitude using the compass rule, and calculate coordinates of points B, C, and D.
Explain what mass, in g, of benzoic acid was burned : When a sample of benzoic acid was burned in a bomb calorimeter having a calorimeter constant of 12.5 kJ/oC, the temperature of the calorimeter (including its contents) rose from 23.18oC to 27.65oC. What mass, in g, of benzoic acid was burned
Estimate the cost of the receiveables loan to johnson : Estimate the cost of the receiveables loan to Johnson when the firm borrows the $300k. The prime rate is 11%.
Determine the speed at which the water leaves the hole : A large storage tank, open to the atmosphere at the top and filled with water, Determine the speed at which the water leaves the hole
Determine the amount of gross profit : How much revenue will Sanderson report in its 2006 and 2007 income statements related to this contract using the percentage-of-completion method?

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  What is the maximum step height

An open rectangular channel is 50 feet wide, flowing at a depth of 5 feet, and is carrying 1000 cubic feet per second. What is the maximum step height than can be placed into the flow without disturbing the upstream depth, without acting as a chok..

  How long the train blocked the crossing

Assuming constant acceleration, determine how long the train blocked the crossing. Dis- regard the width of the crossing.

  Draw the influence line for the support reaction

Draw the influence line for the support reaction at A and calculate the support reaction at point

  What is the range of the values that would be expected

a spot speed study was conducted on a freeway on which the mean speed and the standard deviation were found to be 72 .4 mi/hr and 5.4 mi/hr, respectively. what is the range of the values that would be expected to contain the middle 95 percent of s..

  Depreciation using straight line-double declining balance

Calculate the depreciation using straight-line, double-declining-balance (DBB), and MACRS (current IRS regulation) methods; and tabulate the depreciation schedule.

  Determine horizontal distance between the points

What is the corresponding horizontal distance between the points - The slop distance 156.777 from one poin to another at rate of+1.5%

  How to label turing points numerically starting with tp1

A differential leveling loop started and closed on BM Juno, elevation 5194.02 ft. The BS and FS distancces were kept approximately equal. Readings (in ft) listed in the order takken are 9.65, 2.11, 2.51, 8.35, 2.06, 9.25, 7.93, 2.83, 5.05, and 4.6..

  What hydrodynamic model would you use for the system

Solar cookers can be used in less developed countries for cooking and also for thermal disinfection of water. To disinfect water, the water must be heated to about 35 Celsius for 5 hours. Of course, it takes time to raise the temperature of the wa..

  Mixed liquor volatile suspended solids

For a mixed liquor volatile suspended solids (MLVSS) of 1800 mg/L, what is the total return solids flow rate?

  Determine the flow rate of the oil

Oil of a specific gravity of 0.75 is flowing through a 6-in pipe under a pressure of 15 psi. If the total energy relative to the datumplate is 8.0 ft below the center of the pipe is 58.6 ft, determine the flow rate of the oil.

  Determine the compression of each spring

The 75 lb block is released from rest 5 ft above the plate. Determine the compression of each spring when the block momentarily comes to rest after striking the plate.

  Behaviour of structural material using comparative statement

The behaviour of structural materials using comparative statement when they are formed into structural member

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd