How stable will the collector voltages

Assignment Help Electrical Engineering
Reference no: EM131218968

Assume Vcc = 15 and Vee = -15 volts.

How stable will the collector voltages be for changes of transistor (all 2N3904), and for temperatures from 0° C to 75° C? Is this a stable biasing scheme and are the resistor values suitable?

2346_Figure1.jpg

Calculate the following three AC voltage gains for each of the following three input conditions (9 total gains should be calculated):
Output 1
Output 2

The differential output li,,,t1 - li,,,t2

Input 1 with input 2 grounded. Input 2 with input 1 grounded. (These are differential gains)

Inputs 1 and 2 together with respect to ground (common mode gain).

Don't forget that gain should include sign (relative phase) information. What are the input impedances for these three input conditions?

How does the distortion (or voltage transfer linearity) for this circuit compare with the single transistor 'standard bias' circuit you are already familiar with?

Reference no: EM131218968

Questions Cloud

Use the orthogonality principle to find the mmse estimator : Use the orthogonality principle to find the MMSE estimator. -  Find an expression for the mean square error of the MMSE estimator.
Describe step taken by the bank to ensure it remains solvent : Discuss the importance of risk capital to the banking industry, in particular, Wells Fargo Bank, Citigroup, or Bank of America. Describe the steps taken by the bank to ensure it remains solvent.
Find the wiener hopf equation for the optimum filter : Find the Wiener-Hopf equation for the optimum (in the minimum mean square error (MMSE) sense) filter. - Find the form of the Wiener filter.
Develop cloud-based solutions for an organization : Explain the benefits and drawbacks of using software development tools provided by cloud vendors to develop cloud-based solutions for an organization.
How stable will the collector voltages : How does the distortion (or voltage transfer linearity) for this circuit compare with the single transistor 'standard bias' circuit you are already familiar with?
How are all of the forms of media connected through culture : How are all of these forms of media connected through popular culture? Is there one form of media that in your opinion is more powerful in affecting its audiences than the others?
Display a big text file : What command would you use to display a big text file called "bigfile.txt" to the screen so you scroll through the file line or a page at a time?
How humanistic and existential theories influence : Explain how humanistic and existential theories influence interpersonal relationships. Please include a little on the strengths and limitations of the theories.
Analyze the phenomenon of facebook and twitter : For this written assignment, you are to analyze the phenomenon of Facebook and Twitter, and discuss in what ways social media works as a globalizing force.

Reviews

Write a Review

 

Electrical Engineering Questions & Answers

  Explain three different algebraic methods that can be used

Explain three different algebraic methods that can be used to minimize equations. In your explanation write generalized equations to show how each method is used. Notice the requirement is to explain, don't just write them down.

  What is the magnitude of the emf induced in the coil

A uniform magnetic field is applied perpendicular to the plane of a 60-turn circular coil with a radius of 6.0 cm and a resistance of 0.60 ohms. If the magnetic field increases uniformly from 0.20 T to 1.8 T in 0.20 s

  Implement one-bit full adder circuit using and and or gates

The AND gates should have no more than 3 inputs and the OR gates should have no more than 4 inputs. The one-bit full adder should accept two one-bit inputs and carry-in and should produce one-bit sum and carry-out.

  Find total number of turns needed to produce a flux density

Consider the magnetic circuit shown in Figure. Assume that the reluctance of the iron is small enough so it can be neglected. The lengths of the air gaps are 0.1 cm, and the effective area of each gap is 20 cm2. Determine the total number of turns..

  What is the difference between the words

what is the difference between the words "rated as 3mA" , and "biased at 5mA" , when talking about a diode what is teh difference between saying " the diode is rated as a 3mA device", and " The diode is biased at a current of 0.5mA"

  Determine the power of the modulated signal

An angle-modulated signal with carrier frequency ???ωc=2πx106 is described by the equation φEM(t) =10cos(ωct +0.1sin200πt) (a) find the power of the modulated signal. (b) find the frequency deviation Δf. (c) find the phase deviation ΔΦ.

  Determine the required open-loop gain and bandwidth

Design a non-inverting amplifier for the following specifications: closed-loop gain = 5, gain error = 1%, closed-loop bandwidth = 50 MHz. Determine the required open-loop gain and bandwidth of the op amp. Assume the op amp has an input bias curren..

  What type of electron transition from valence to conduction

1) When discussing the generation of electron/ hole pairs by light in semiconductors is it best to use the wave or particle rendition of light energy. 2) In what type of electron transition from valence to conduction band is momentum conserved, dir..

  Which protocol successfully delivers all five data segments

Compare GBN, SR, and TCP(no delayed ACK). Assume that the timeout values for all three protocols are sufficiently long such that 5 consecutive data segments and their corresponding ACKs can be received (if not lost in the channel)

  A uniformly doped silicon pn junction

A uniformly doped silicon pn junction at T = 300 K, with Na = 1018 cm-3, is to be designed such that at a reverse-bias voltage of 10 V, the maximum electric field is limited to εmax =105 V/cm. Determine the maximum doping concentration in the n-regio..

  How much are the power losses in the motor

a DC motor turns at a speed of 1460 rpm and produces an output torque of 3.0Nm. The DC voltage applied to the motor is 100V and a current of 5.1A flows through the motor. A. What is the efficiency of the motor

  Explain the graph we recieved in the simulation that

explain the graph we recieved in the simulation that shows the relationship between the recieved throughputand sent

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd