How much water horsepower is required to pump the head

Assignment Help Civil Engineering
Reference no: EM13317737

how much water horsepower is required to pump 380 gpm against a total head of 420 feet? If the efficiency in the above problem is 85 percent and the pump efficiency is 80 percent. Calculate the required horsepower?

Reference no: EM13317737

Questions Cloud

Determine the angle of internal friction for the soil : A cohesionless soil sample was subjected to a triaxial test. The sample failed when the minor principal stress (confining pressure) was 1200 lb/ft^2 and the deviator stress was 3000 lb/ft^2.
Determine the temperature rise in the plate : A copper plate, with dimensions of 3 cm x 3 cm x 5cm length, width, and thickness respectively, determine the temperature rise in the plate after 10 seconds
Determine how will the flow divide into pipeline branches : A 24-inch pipeline branches into a 12-inch and an 18-inch pipe, each of which is 1 mile long, and they re-join back into a 24-inch pipe. If the flow rate is 30 CFS in the main pipe
How far is this point from the center of the wire : The magnetic field due to a 2-A current flowing in a long, straight wire is 8 %u03BCT at a point P, a certain distanceaway from the wire
How much water horsepower is required to pump the head : how much water horsepower is required to pump 380 gpm against a total head of 420 feet. If the efficiency in the above problem is 85 percent and the pump efficiency is 80 percent. Calculate the required horsepower.
Find the force constant of the spring : a 1.99 kg block slides on a rough, horizonatl surface. The block hits a spring with a speed 2.16 m/s, what is the force constant of the spring
Determine the magnitude of the current : A circular conducting loop with a radius of 0.30 m and a small gap filled with a 10.0 ohm resistor is oriented in the xy-plane. what is the magnitude of the current that will be caused to flow in the conductor
What is the slope of the budget line : PUBP720: Managerial Economics - Make the first order partial derivatives of the Lagrangian and set them to 0 - What is the slope of the budget line? Does the slope of the budget line depend on consumer preferences? Why or why not?
What is the expected annual savings and expected pw : An energy efficiency project has a first cost of $300,000, A life of 10 years, and no salvage value. Assume that the interest rate is 9%. The most likely value for annual savings is $60,000.

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Estimate the size of a uniform horizontal welded-steel pipe

Estimate the size of a uniform, horizontal welded-steel pipe installed to carry 14.0 ft^3/sec of water 20 degreesC. The allowable pressure loss resulting from friction is 17ft/mi of pipe length.

  Find profitable blend of alloys that will satify requirement

Suppose a specialty steel company receives an order for 200 tons of steel containing at least 3 percent nickel and 2 percent manganese, with a carbon content not exceeding 3.5 percent. The steel will sell for $25 a ton.

  Compute the parts of the curve including t-l-lc-e-m and d

A simple horizontal curve of radius 750 ft connects two tangents that intersect at an angle of 66º30'. Compute the parts of the curve, including T, L, LC, E, M, and D.

  Determine how much heat had to be transferred to the vessel

Alkaloids are chemical compounds containing nitrogen that can be produced by plant cells. In an experiment, an insulated closed vessel 1.673 m3 in volume was injected with a dilute water solution containing two alkaloids: ajmalicine and serpentine..

  Estimate the ground level so2 at a point of the power plant

A power plant emits 95 g/s of SO2 from an effective stack height of 60 m. The wind speed is 3 m/s and the solar insolation is slight. A) Estimate the ground level SO2 (ug/m^3) at a point 4 km directly downwind of the power plant

  What fracture aperture is for single fracture to conduct

What would the aperture have to be if there were two fractures of equal aperture. For your calculations you can assume that the rock matrix that contains the fracture(s) has zero hydraulic conductivity.

  How to estimate for the loaded machines on level ground

Stripping overburden in the Illinois coal belt, the Dusty Coal Company uses 270-horsepower, track-type tractors (with direct-drive transmissions) and drawn scrapers.

  Describe what are the basic components of a building

What are the basic components of a building. Discuss the main requirements of each part to fulfill its primary function.

  Determine what is the vial radius of curvature in meters

After moving the bubble four divisions off center, the reading is 1.410 m. For 2-mm vial divisions, what is (a) the vial radius of curvature in meters and (b) the angle in seconds subtended by one division

  Why is too much fluoride in drinking water a problem

A chemical mixing basin is to be designed to blend chlorine and treated wastewater. The basin flow is 700 gallons per minute and the basin dimensions are 5 feet by 5 feet by 5 feet water depth.

  What is the maximum column load in kips that could be placed

What is the maximum column load in kips that could be placed on a 4-ft square temporary footing on a sand for which the standard resistance is about N=15 and the water table is at the surface A factor of safety of 2 is to be maintained against bea..

  Determine the volume of water infiltrated on the field

a 30-acre field received 4 inches of rain with 35% runoff.Determine the volume of water infiltrated on the field ( assume all the water that doesn't runoff infiltrates )

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd