How many acres should the detention pond be to store

Assignment Help Civil Engineering
Reference no: EM13315183

a rainstrom lasts for 90 min at a constant intensity of 3.2 in/hr over a five acre parking lot. a detention pond is used to store all of the runoff from the parking lot and cannot be deeper than 2 ft. how many acres should the detention pond be to store the runoff from the parking lot. assume it takes 0.1 inches of rain to coat the parking lot surface, there is no inflitration from, or puddles on, the parking lot. Hint: set up a continuity expression for the pond with a variable surface area and solve for area.

Reference no: EM13315183

Questions Cloud

Estimate the vertical hydraulic conductivity using the heads : Write Darcy's equation in 2-D. There are three piezometers in an unconfined sand aquifer as shown below. The head measurements at A = 104.56 ft, B = 104.53 ft, C = 103.42 ft. The rate of recharge here is estimated to be 1.25 ft/yr.
Determine direction and magnitude of hydraulic gradient : Piezometer A is located 3000 feet due south of piezometer B. Piezometer C is located 2000 feet due west of piezometer B. The surface elevations of A, B and C are 480, 610 and 545 feet respectively. The depth to water in A is 40 feet, in B is 140 f..
What should be the magnitude of the air resistance force : A skydiver opens the parachute at the moment when he is 540 meters above the ground and his speed (right before opening the parachute) is 97m/s. What should be the magnitude of the air resistance force
Persuasive techniques used in consumer advertising : Consider the key persuasive techniques used in consumer advertising - Critical issues that could arise from the areas - children and Advertising
How many acres should the detention pond be to store : a rainstrom lasts for 90 min at a constant intensity of 3.2 in/hr over a five acre parking lot. a detention pond is used to store all of the runoff from the parking lot and cannot be deeper than 2 ft.
To what height does the package of mass rebound : What is the maximum speed of a 2.20g particle that oscillates between x =2.0mm and x =8.0mm, Suppose the collision between the packages is perfectly elastic. To what height does the package of mass m rebound
What is the ideal speed for a motorist to take the curve : A curve is banked at an angle of 30 degrees with respect to the horizontal. what is the ideal speed for a motorist to take the curve when it is covered by glare ice
What are the cars velocity and acceleration vectors : The car's position is defined by the position vector, where . The image below shows the system projected onto the x-y plane. What are the car's velocity and acceleration vectors at this position
What is the equivalent resistance of the three resistors : Resistors R1, R2, and R3 have resistances of 37.0-ohm, 22.0-ohm, and 41.0-ohm respectively. R1 and R2are connected in series, and their combination is in parallel with R3. What is the equivalent resistance of the three resistors

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine magnitude and location of resultant force acting

The tank contains water to depth of 2m and oil (SG=0.8) on top of the water to a depth of 1m. Determine the magnitude and location of the resultant force acting on one end of the tank (i.e. 3m high by 3m wide).

  Balancing of reciprocating engines

If the engine is mounted solidly on a rigid foundation, what is the alternating force amplitude transmitted? Assume the connection rod to be of infinite length.

  Maximum total load that can be applied to a truss

How do you find the force ratio equation to determine the maximum total load that can be applied to a truss? Given a force of a member how do you find the force ratio?

  Determine what would be the flow rate in gpm

Suppose that a water treatment plant has a Parshall Flume with a 4 ft wide throat. a) If the upstream depth of the water (ha) is 1 ft and the depth of the water in the throat section (hb) is 0.65 ft, what is the flow rate in gpm

  Calculate the volume of a cylinder that contains 60 lbm

Calculate the volume of a cylinder that contains 60 lbm of carbon dioxide at 230°F and 23 psig pressure. Assume atmospheric pressure to be 14.7 psia.^4

  What is the minimum detention time in hours to settle out

The settling velocity of alum floc in a sedimentation basin is approximately 0.0014 fps. Calculate the equivalent overflow rate in gpd/ft2. What is the minimum detention time in hours to settle out the alum floc in an ideal basin with a depth of 1..

  Determine the normal stress on the outside of the frame

A building frame is made with a 10" square steel box shape that has an area of 15 in^2 and a moment of inertia I =225 in^4. The frame consists of pinned supports at points A and F and an internal pin at point D.

  Determine elevation and stationing of high point pvc and pvt

a 520 ft long equal tangent crest vertical curve connects tangents that intersect at station 340 00 and elevation 1325 ft the initial grade is if 4 and the final grade is 2.5.

  Determine the percent elongation and percent reduction

Determine the percent elongation and percent reduction in area of each specimen.

  Discuss all the factors that the client should consider

A flocculation/sedimentation combination basin in a conventional drinking water treatment plant is to be constructed of cast-in-place reinforced concrete. The horizontal flow rectangular basin will be located in New Jersey, USA.

  What would be the fraction of trucks entering the section

Consider a highway section where traffic is stationary, all trucks travel at speed s and cars at speed v. If aerial surveillance revealed that trucks were a fraction p of the vehicles on a photograph

  Determine using energy methods speed of crate after moving

The coefficient of friction between the crate and the floor is µs = 0.4 and µk = 0.3. If P is slowly increased until the crate starts to move and then remains constant, determine using energy methods the speed of the crate after moving 2 m.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd