How far will the column of mercury in the tube be depressed

Assignment Help Civil Engineering
Reference no: EM13303187

An open clean glass tube, having a diameter of 3 mm is inserted vertically into a dish of mercury at 20c .How far will the column of mercury (S.G =13.6) in the tube be depressed in (mm) given the following information. Theta = 130 and surface tension = 4.66*10^-1

Reference no: EM13303187

Questions Cloud

Find best possible angular resolution that can be achieved : Radio telescopes use radio waves (instead of light) to produce images. what is the best possible angular resolution that can be achieved
Find the maximum acceleration experienced by the cars : The roadway follows the equation (x^2/(60m)^2) + (y^2/ (40m) ^2) = 1 where x and y are in meters. Find the maximum acceleration experienced by the cars. Hint: begin by making a sketch of the ellipse.
What plan should the firm implement : The interest rate on the notes payable is 12% on a discount interest basis with a 30% compensating balance. What plan should the firm implement?
Distinction in the holiness code : How does the Book of Leviticus distinguish between the clean and the unclean? Is there any ethical counterpart to this distinction in the Holiness Code?
How far will the column of mercury in the tube be depressed : An open clean glass tube, having a diameter of 3 mm is inserted vertically into a dish of mercury at 20c .How far will the column of mercury (S.G =13.6) in the tube be depressed in (mm) given the following information. Theta = 130 and surface tens..
Explain the significance of the golden calf episode : Explain the significance of the golden calf episode. How does the people's disloyalty affect YHWH? What does the Deity propose to Moses, and how does Moses dissuade YHWH from his wish to destory Israel?
Determine what is the decrease in diameter d : A bar of monel metal (length L=9 in., diameter d=0.225 in.) is loaded axially by a tensile force P. If the bar elongates by 0.0195 in., what is the decrease in diameter d What is the magnitude of the load P
Determine the potential difference across the battery : A 8.5 omegacap.gif resistor and a 5.9 omegacap.gif resistor are connected in series with a battery. Find the potential difference across the battery
Effects of urban heat islands on regional ecosystems : Discuss the effects of urban heat islands on regional ecosystems - Does Cowles view the systems via holism or reductionism? What is the single philosophical concept that emerges from his work?

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Dry unit weight of material

A soil borrow material in its natural state in the ground has a unit weight of 118pcf. Its natural water content is 7%. What is the dry unit weight of this material?

  Obtain the dimensionless groups that charactrize the problem

The power loss, p , in a journal bearing depends on length, L; diameter, D; clearance, c; and rotational speed, w. You also have to worry about lubricant viscosity, density, and pressure. Obtain the dimensionless groups that charactrize this probl..

  Sketch and annotate the wedge described above

Sketch and annotate the wedge described above.

  Determine the modulus of elasticity of the material

A tensile test was performed on a metal specimen having a circular cross section with a diameter of 0.50 inch. The gage length is 2 inches. For a load of 13.5 kips, the elongation was 4.66 x 10-3 inches.

  What was involved in the first far-reaching

what was involved in the first far-reaching, comprehensive study of Earth's oceans?

  How many cubic meters of water are needed

Establish a grass cover over a 10ha landfill. The root zone of the grass is 40cm deep. Increase the volumetric water content of root zone from 12% to 24%. How many cubic meters of water are needed?

  Design a shore river intake system in a cold climate

Provide the minimum number of ports. The design conditions are: Winter design fl ow rate  4,300 m 3 /d Minimum river elevation held constant by lock and dam system  99.0 m 500-year fl ood elevation  113.3 m River bottom elevation  90.4 m

  Length of contracted rectangular weir

A trapezoidal canal 6m wide at the bottom and having a side slope of 1V:2H carries water with a mean velocity of 1.0m/s to a depth of 60cm. What length of contracted rectangular weir 1.0m high should be placed at the middle of the canal to make th..

  Design temperature and residence time have been established

The oven exhaust gases are available at 250 F. Assume that the design temperature and residence time have been established as 1300 F and 0.6 sec, respectively. The type of burner used in the process requires outside air at a moass ratio of 12:1

  What is result of volume change in saturated cohesive oil

What is the result of a volume change in a saturated cohesive soil because of expulsion of the water occupying the void spaces

  Determine the normal stress on the outside of the frame

A building frame is made with a 10" square steel box shape that has an area of 15 in^2 and a moment of inertia I =225 in^4. The frame consists of pinned supports at points A and F and an internal pin at point D.

  How to compute the normal depth of a trapezoidal channel

A trapezoidal channel with a bottom width of 4 feet and side slopes 2:1 (H:V) and a bed slope of 1 percent conveys a discharge of 50,000 gpm. Assume n = 0.025. Compute the normal depth.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd