Find the velocity and temperature at the pipe exit

Assignment Help Mechanical Engineering
Reference no: EM131467147

Question: Consider compressible flow through a long, well-insulated duct. At the inlet to the duct the Mach number, pressure, and temperature are 0.3, 100 kPa, and 30°C respectively. Assuming that the flow is adiabatic and that the pipe is sufficiently long to ensure that the flow is choked at the exit, find the velocity and temperature at the pipe exit.

Reference no: EM131467147

Questions Cloud

Reflections on the progressive case study : Conclude the assignment with these 2 components. Reflections on the Progressive Case Study.
Degree of information gathering as well as accountability : The retrospective survey like other surveys offers a degree of information gathering as well as accountability.
Conduct research into the cultural characteristics : For any country of your choice (besides the United States), conduct research into the cultural characteristics and summarize these characteristics.
Instructional implications of each delivery model : Assess the instructional implications of each delivery model. Specifically address the strengths and challenges of each model.
Find the velocity and temperature at the pipe exit : Consider compressible flow through a long, well-insulated duct. At the inlet to the duct the Mach number, pressure, and temperature are 0.3, 100 kPa.
What type of compensation plan will you recommend : What type of compensation plan will you recommend? How will this compensation plan create the work environment you need?
What does it mean to be fully human : What does it mean to be fully human? Do you think we can be fully human while interacting with others in a virtual space? Why or why not?
Examine the duties and responsibilities of a hr specialist : Examine the three trends in HR that you researched. Provide probable causes for these trends. Provide probable causes for these trends.
Use of comparative statistics and research : Identify three considerations that should be part of the use of comparative statistics and research when writing your needs statement.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  A round casting is 0 2 m in diameter and 1 m in length what

a round casting is 0. 2 m in diameter and 1 m in length. another casting of the same metal is elliptical in cross

  The diffusivity of copper in a commercial brass alloy

The diffusivity of copper in a commercial brass alloy is 10^-20 m2/s at 500'C. The activation energy for diffusion of copper in this system is 195 kJ/mol. Calculate the diffusivity at 600'C.

  Determine the flow area and the hub and tip radii

A single-stage axial-flow gas turbine stage with a hub/tip ratio of 0.85 is to be designed to give a free-vortex flow after the rotor row and is required to develop 2.6 MW from a gas flow of 30 kg/s.

  What failure percentage would be expected in service

To what value would the standard deviation of part strength have to be reduced in order to give a failure rate of only 1%, with no other changes?

  Water flows from a large tank through a 20-m long 3 cm by 2

water flows from a large tank through a 20-m long 3 cm by 2 cm rectangular pipe. flow exits from the tube with velocity

  Use a psychrometric chart to determine the following

a sling hygrometer measures a dry-bulb temperature of 24. 5 degree c and a wet-bulb temperature of 16 degree c. use a

  Compute the electron concentration

The room-temperature electrical conductivity of a semiconductor specimen is 25 (ohm-m)-1. The whole concentration is known to be 2.5E+19 m-3. The electron and hole mobilities for this material are 0.38 and 0.18 m2/V·s, respectively. Compute the elect..

  For one-dimensional steady state conduction in

for one-dimensional steady state conduction in cylindrical or spherical shell without heat generation is the radical

  Understanding in arduino programming

Objective: The purpose of this set of labs is to gain an understanding in Arduino programming, and capabilities. Students take an Arduino and program it to carry out different functions depending on the specifications of the lab.

  Calculate the pressure at the bottom of the cube

A cube whose sides are length L. The cube is open at the top (exposed to an atmospheric pressure, PO), but all of the side and bottom faces are solid material. If L = 3 feet and the temperature of the fluid is 70°F, calculate the pressure at the bot..

  Determine the force required to open the valve

Determine the force required to open the valve - What length of cable CD is required for static equilibrium in the position shown? What is the tension T in cable CD?

  The piston is then released and equilibrium established

a rigid insulated cylinder is divided into two parts by a non-insulated frictionless piston which is initially held a

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd