Find the residual chemical concentration and the amount

Assignment Help Civil Engineering
Reference no: EM13564855

A chemical is added at the beginning of a water treatment plant at a dose of 750 lb/day. The water treatment plant provides water to a community of 200,000 people and the average water consumption in the city is 110 gallons per capita per day (gpcd). If 10% of the chemical remains following reactions (i.e., 90% of the added chemical reacts following addition), find the residual chemical concentration (in mg/L) and the amount of chemical that was required for the reaction (in mg/L).

Reference no: EM13564855

Questions Cloud

Find the speed of each ball after the collision : A cue ball travelling at 5.0 m/smakes a glancing, elastic collision with a target ball of equalmass that is initially at rest. Find the speed of each ball after the collision
What is the average horsepower output of the engine : When gasoline is burned, it gives off 46,000 J/gram of heat energy. what is the average horsepower output of the engine
What temperature change is required to return the 100-mm : The elastic modulus is 40 GPa, the yield stress is 150 MPa, the ultimate stress is 525 MPa, and the ultimate strain is 0.38 (mm/mm). Perform the following tasks for this material.
Evaluate what impulse was given to the ball by the floor : a ball of mass 0.150 kg is dropped from rest from a height of1.25m. It rebounds from the floor to reach a height of 0.960m. What impulse was given to the ball by the floor
Find the residual chemical concentration and the amount : A chemical is added at the beginning of a water treatment plant at a dose of 750 lb/day. The water treatment plant provides water to a community of 200,000 people and the average water consumption in the city is 110 gallons per capita per day (gpcd).
Evaluate the volume of the paper weight : A paperweight, when weighed in air, has a weight of W = 6.9N.When completely immersed in water, however, it has a weight of Win water = 4.3 N. Find the volume of the paper weight
How would your answer be different if the source : A stream with a flow of 22 mgd contains 180 mg/L of sodium cyanide in the form of NaCN. Chlorine can be added to destroy the NaCN waste according to the reaction shown below. Find the theoretical minimum amount of chlorine required (in lb/day). How w..
Find the angular speed of the sphere at the bottom of hill : A 270 N sphere 0.20 m in radius rolls,without slipping 6.0 m down a ramp that is inclined at 31° with the horizontal. What is the angular speed of the sphere at the bottom of the hill
Evaluate what is the frequency of the system : An object moving in simple harmonic motion has an amplitude of0.05 m and a maximum acceleration of40 m/s2. What is the frequency of the system

Reviews

Write a Review

Civil Engineering Questions & Answers

  What horsepower must be supplied to the pump in order

A pump of 80% efficiency lifts water from one large open tank to another; the difference in water surface elevations is 20 feet. The pipe is relatively smooth (f = 0.0122), and has 3 elbows, each with a loss coefficient of 2/3.

  Determine the safety factor of the wire against breaking

The length of the wire is 7,000 m, the weight density of the steel is 78 kN/m3 and its ultimate stress is 620 MPa. Find the safety factor of the wire against breaking from its own weight.

  What is the magnitude and direction of specific discharge

Groundwater moves through a sandstone porous media and is driven by a gradient of -0.05 directed at an angle of 60 degree counterclockwise from the x-axis.

  Determine the probability that ball is white

Box I contains 3 red and 5 white balls, while Box II contains 4 red and 2 white balls. A ball is chosen at random from the first box and placed in the second box without observing it's color. Then a ball is drawn from the second box.

  Show process on t-v diagram with respect to saturation line

An insulated rigid tank is initially filled with a saturated liquid-vapor mixture of water. Initially three-quarters of the mass is in the liquid phase, the mass is 10 lbm, and the pressure is 15 psia.

  Determine what is the carbonaceous oxygen demand

Given a water that contains 80 mg/L of glucose (C6H12O6) and 18 mg/L of ammonia (NH3): a. What is the carbonaceous oxygen demand (in mg 02/L) b. What is the nitrogenous oxygen demand (in mg 02/L)

  Convert the pressure to mm of blood assuming the specific

The sphygmomanometer is a device used to measure blood pressure. For a healthy person, the diastolic pressure is about 80mmHg (gage). Convert the pressure to mm of blood assuming the specific gravity of mercury and blood are 13.6 and 1.05, respective..

  Determine shear stress on the failure plane at failure tao

A conventional consolidated drained (CD) triaxial test is conducted on sand. The cell pressure is 100 kPa, and the applied axial stress at failure is 200 kPa.

  Explain the log growth phase of population generation

Explain the log growth phase of population generation showing the population growth curve (S curve). Deduce the equation for this method of population projection.

  What torque is required to rotate the inner cylinder

Crude oil at 20 degrees C fills the space between 2 concentric cylinders 250mm high with diameter of 150 and 156mm. What torque is required to rotate the inner cylinder at 12 rev/min

  At what rate is the diameter increasing

a spherical balloon is being inflated so that its volume is increasing at the rate of 5 cu meter/min. at what rate is the diameter increasing when the diameter is 12m?

  How to calculate the depth of a masonry dam

How to calculate the depth of a masonry dam of trapezoidal cross section with height of 24ft,2ft top width,,12 ft base width and weight of concrete 150 lb/ft^3.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd