Find the probability that more than 8 fail before 10 months

Assignment Help Civil Engineering
Reference no: EM13316640

Suppose that under severe operation conditions, the lifetime, in months, of a transisitor is exponentially distributed with parameter ? = 0.2.

a. Find the probability that such a transistor lasts longer than 8 months.

b. Find the probability that the lifetime of a transistor is between 4 and 10 months.

c. Suppose 10 transistors are operating independently. Find the probability that at least 2 of them last longer than 8 months.

d. Find the probability that more than 8 fail before 10 months.

Reference no: EM13316640

Questions Cloud

Translate organizational strategies in to employee behaviors : In order to translate organizational strategies in to employee behaviors that support these strategies, performance management systems use a variety of techniques at the individual employee level. These techniques include all of the following EXCEPT
What time interval does one electron travel full length line : A high-voltage copper transmission line with a diameter of 2.60 cm and a length of 130 km carries a steady current of 1.03 103 A. what time interval does one electron travel the full length of the line
Comprehensive analysis of all current jobs : A comprehensive analysis of all current jobs in the organization can answer all of the following questions EXCEPT
Find the magnetic flux through each turn : A 10-turn ideal solenoid has an inductance of 3.5 mH. When the solenoid carries a current of 8.0 A the magnetic flux (in mWb) through each turn is
Find the probability that more than 8 fail before 10 months : Suppose that under severe operation conditions, the lifetime, in months, of a transisitor is exponentially distributed with parameter d = 0.2. a. Find the probability that such a transistor lasts longer than 8 months.
A baby bomber manager of a generation y subordinate : A baby bomber manager of a Generation Y subordinate may
Determine the rms current in the circuit : An ac generator producing 10 V (rms) at 300 rad/s is connected in series with a 25-? resistor, The rms current in the circuit (in mA) is
Determine the velocity with a static pressure in pipe : Water with a static pressure of 1.96kN/M2 flows through an 800 mm diameter pipe. A pitot tube pressure gage in this pipe reads a pressure of 5.88 kN/M2. Determine the velocity (V)
How high above the ground does it go before coming to a stop : A 5.60 kg of mass is pressed against a spring with a spring constant of 12500 N/m. how high above the ground does it go before coming to a stop

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine rate of production of final product nd composition

An ethanol plant distills alcohol from corn. The distiller processes 2.0 t/h of feed containing 15% alcohol and 82% water; the rest is inert material. The bottoms (waste) produced is 85% of feed and contains 94% water, 3.5% alcohol, and 2.5% inert..

  Calculating energy for vacancy formation

The number of vacancies in some hypothetical metal increases by a factor of 4 when the temperature is increased from 1090 K to 1140 K. Calculate the energy (in J/mol) for vacancy formation assuming that the density of the metal remains the same ov..

  Determine what is the pressure of methane in the balloon

helium gas contains trace amounts of methane. Consider a helium balloon pressurized to 5 psi. If methane molar mixing ratio is 800 ppmv, what is the pressure of methane in the balloon

  What are the volumetric flow rates of the two outlet streams

A permeation membrane separates an inlet air stream (79 mol% N2, 21 mol% O2) into a permeate stream and a reject stream. The inlet stream conditions are 293K, 0.5 MPa and 2 mol/min; the conditions for both outlet streams are 293 K and 0.1 MPa.

  Compute the ratio of the nominal flexural strength

Compute the ratio of the nominal flexural strength of the beam to the maximum service load moment, and compare your findings to the ACI load factors and strength reduction factor.

  Compute gravitational force and force of mutual attraction f

two steel spheres 100mm in diameter. Compute gravitational force and the force of mutual attraction F in newtons. the specific weight of steel is 0.284 lb/in^3

  Moles of gas in the gas sample

A gas occupise 250 ml and it's pressure is 550mm Hg @ 254C how many moles of gas are in this sample? (convert mm Hg to atm).

  Determine what is the concentration of nox

At 100 km downwind (y=10m), what is the concentration of NOx in g/m^3. The wind speed at the top of the stack with a height of 100m is 6.5 m/s and an inversion layer of 750m Pressure air = 95kPa

  Calculate deformation of truncated equilateral steel pyramid

Calculate deformation of the truncated equilateral triangular steel pyramid. The pyramid has the height h of 156mm truncated at the top by 2mm and the base side s of 127mm.

  Compute the maximum service

Compute the maximum service (unfactored) concentrated live load that can be applied at 1ft from the free end of the cantilever. Use load and strength -reduction factors from ACI Code Sections 9.2 and 9.3. Also check As,min.

  Calculate the ieee double precision floating number

Calculate the IEEE double precision floating number immediately greater than the minimum number in double precision in both binary and decimal form

  Which will cause reaction at the bearing to be equal to zero

Determine the magnitude of which will cause the reaction at the bearing to be equal to zero. The bearings are in proper alignment and exert only force reactions on the rod. Set = 600 .

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd